More Horsepower for Your MINI Cooper

With the modifications to the engine that were suggested in Section 2, it is possible to bring the engine’s power to well over 200 horsepower. But there’s more where that came from, if you’re looking for more performance.

By getting deeper into the engine, we can bring the car up to as much as 300 horsepower, and add more torque in the rpm mid-range, adding to the car’s performance off the line, when overtaking other cars, and getting out of the corners.  Horsepower-enhancing aftermarket parts include a plasma booster for spark plug performance, spark plug wires to take advantage of the stronger spark, a hotter camshaft, and an improved cylinder head, as well as silicone hoses to improve reliability.

Plasma Booster Ignition Upgrade

The intensity of the spark that is delivered to the cylinder by the spark determines how efficiently the air/fuel mixture in the cylinder will be ignited. The efficiency of the ignition in turn affects the engine’s power output, mileage, and smoothness of operation.

A simple “black box” can be added to the ignition system to achieve these benefits. Called a Mini Cooper Plasma Booster, it is a power amplifier that increases the power of the primary and secondary spark circuit by nearly 100 percent to deliver a much “hotter” (more powerful) spark to the cylinder. A more powerful spark will ignite the air/fuel mixture more easily, and cause the mixture to burn more quickly. The result is more power from the fuel, more efficient use of fuel, and more consistent power from each individual firing for smoother engine operation.

Individual measurements before and after the addition of the plasma booster indicate an additional four horsepower from the engine, and ten percent better fuel economy. The Plasma Booster costs about $270, and can be added to the engine in just a few minutes without any special tools. As a nice plus, it is certified for use in MINIs by the California Air Resources Board because of its benefits in reduced emissions and better fuel mileage.

High-tech Spark Plug Wires

Interestingly, some high-tech spark plug wires can provide an alternative to the Plasma Booster to accomplish the same task of increasing the intensity of the spark produced by the spark plug and thus provide the same benefits.

The Nology company makes a set of spark plug wires that each incorporate a capacitor and separate ground connection. With this addition, the spark plug wire itself stores up the energy of the spark until it reaches a high intensity level, then releases it in a shortened burst that provides a quick, clean ignition of the fuel/air mixture.

The manufacturer claims an increase in spark intensity of over 300 percent, which measurably increases horsepower and mileage, and reduces emissions by providing more a complete burn of fuel. An added benefit is that the substitution of the high-tech spark plug wires is legal under California Air Resources Board regulations.

The Nology spark plug wires sell for $199 for the set, and can be ordered in red, blue, yellow or black for that added eye appeal in the engine compartment. Even better, they can be installed without any special tools.

Improving the Intercooler

As we discussed in an earlier chapter, performance of the supercharger on the MINI is enhanced by the presence of an intercooler. If the supercharger was used without an intercooler, as the engine heat increased intake air would be heated, as well. And as we know, hot air is thinner than cool air. The result would be that as the engine heated up, it would produce less horsepower than when it had first been started up.

To solve this problem, the intercooler, which looks like a radiator, surrounds the air duct between the air intake box and the supercharger. Air coming in through the hood scoop blowing across this radiator helps cool the incoming air to make the supercharger work more efficiently. This type of design is called an “air to air” intercooler.

However, the limited space available withiin the engine compartment imposes some design contraints that limit the performance or the intercooler. In particular, there is very little space underneath the intercooler, limiting air flow through the intercooler.
To improve on this design, several suppliers have designed their own air-to-air intercoolers that can be substituted for the factory intercooler. These improved designs will improve the intercooler’s ability to cool intake air. They don’t actually increase horsepower, but they do reduce the loss of horsepower due to heat, so a MINI equipped with one of these devices will give better performance than a MINI equipped with the stock intercooler.

Some other sources have taken one more step, and created a water misting system, which sprays water on the intercooler. These systems take advantage of the same principle of water evaporation that causes you to feel cool when you first come out of the water in the summer. These systems help the intercooler work more efficiently by taking advantage of the water evaporating off the intercooler’s radiator.

However, at least one designer has taken a completely different approach to the problem. This company produces a “water-to-air” intercooler, which has shown significantly better performance not only when compared to the factory intercooler, but also when compared to aftermarket air-to-air intercoolers.

This water-to-air intercooler works by using water as the cooling medium from the start, piping water around the intake passage, and then circulating that water through a radiator to dissipate the heat from the air intake. In tests as the engine heats up, or is pushed hard in performance driving, this system has been shown to significantly reduce the loss of engine horsepower when compared to the stock system or any of the other aftermarket air-to-air or water-spray intercoolers.