× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Upgrade any standard MINI brakes with JCW's performance FRONT slotted and drilled rotors and the EBC Redstuff performance ceramic brake pads front & rear. This kit includes the 'standard' sized Cooper S 294 x 22mm front rotors.

This kit does not include rear rotors (JCW does not offer a matching 'slotted and drilled' rear rotor upgrade).

Fits the following Cooper S models:

2007-2013 R56 MINI Cooper S Hatchback
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertibles
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster

For the Cooper (non-S) model, see G2NMB2003.

Cooper kit includes two new Caliper Brackets to accept the larger rotors.

Cross-drilled for enhanced performance, these JCW ventilated FRONT brakes rotors always provide immediate response with plenty of bite.

Stock rear rotors available here.

For improved pedal feel, take a look at the Stainless Steel Braided Brake Lines.

Redstuff Ceramic - 3000 Series Performance Brake Pads - For Highly Tuned Cars and Fast Street.

This material is an Aramid fibre based brake compound enhanced with ceramic particles. Updated from the previous generation pre-ceramic compound, this material is light years ahead. It lasts longer, it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads.

Features:
* High Initial Brake Effect
* Strong Resistance To Fade Under Load
* Reduced Rotor Wear
* Low Dusting Of Wheels
* Shimmed; Chamfered; And Slotted
* Features EBC Brake-In Coating For Fast Break In
* Zero Noise And Extended Lifetime
* Accepts factory brake wear sensor

NOTE:
Brakes are a safety critical part of your vehicle and should be installed by a competent mechanic following vehicle manufacturers installation procedure. The surface of these brake pads is coated with a red coating known as BRAKE-IN. This coating helps your newly installed brake pads to 'seat' or bed-in quickly. However, pads should be used gently for the first 100 miles until optimum braking is observed. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

Follow manufacturers instructions for 'bedding in' new pads.
Not for track use.

If your Brake Wear Warning light is illuminated, you need to replace the Brake Wear Sensor OEM.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

MINI Cooper S Stage 2 Brake Upgrade Kit with JCW rotors and EBC Redstuff pads

MINI Cooper S Stage 2 Brake Upgrade Kit with JCW rotors and EBC Redstuff pads

MINI Cooper S Stage 2 Brake Upgrade Kit with JCW rotors and EBC Redstuff pads

MINI Cooper S Stage 2 Brake Upgrade Kit with JCW rotors and EBC Redstuff pads

MINI Cooper S Stage 2 Brake Upgrade Kit with JCW rotors and EBC Redstuff pads
Selected: Cooper S
Part No: G2NMK2002
This item is not available.
Fits the following:
MINI (2002-Current)
PayPal Pay Later
Select variations below for more info:
Upgrade your standard brakes with JCW's performance FRONT slotted and drilled rotors and the EBC Redstuff performance ceramic brake pads front & rear. This kit includes adapters to fit the 'standard' sized Cooper S 294 x 22mm front rotors on the Cooper non-S models. The adapters moves the caliper to fit the larger front rotors.  Standard Cooper rotors are 280 x 22mm.

This kit does not include rear rotors (JCW does not offer a matching 'slotted and drilled' rear rotor upgrade).

Fits the following Cooper (non-S) models:

2007-2013 R56 MINI Cooper Hatchback
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertibles
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster

For the Cooper S model, see G2NMB2002.

Cross-drilled for enhanced performance, these JCW ventilated FRONT brakes rotors always provide immediate response with plenty of bite.

Stock rear rotors available here.

For improved pedal feel, take a look at the Stainless Steel Braided Brake Lines.

Redstuff Ceramic - 3000 Series Performance Brake Pads - For Highly Tuned Cars and Fast Street.

This material is a Aramid fibre based brake compound enhanced with ceramic particles. Updated from the previous generation pre-ceramic compound, this material is light years ahead. It lasts longer, it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads.

Features:
* High Initial Brake Effect
* Strong Resistance To Fade Under Load
* Reduced Rotor Wear
* Low Dusting Of Wheels
* Shimmed; Chamfered; And Slotted
* Features EBC Brake-In Coating For Fast Break In
* Zero Noise And Extended Lifetime
* Accepts factory brake wear sensor

NOTE:
Brakes are a safety critical part of your vehicle and should be installed by a competent mechanic following vehicle manufacturers installation procedure. The surface of these brake pads is coated with a red coating known as BRAKE-IN. This coating helps your newly installed brake pads to 'seat' or bed-in quickly. However, pads should be used gently for the first 100 miles until optimum braking is observed. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

Follow manufacturers instructions for 'bedding in' new pads.
Not for track use.

If your Brake Wear Warning light is illuminated, you need to replace the Brake Wear Sensor OEM.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Upgrade any standard MINI brakes with JCW's performance FRONT slotted and drilled rotors and the EBC Redstuff performance ceramic brake pads front & rear. This kit includes the 'standard' sized Cooper S 294 x 22mm front rotors.

This kit does not include rear rotors (JCW does not offer a matching 'slotted and drilled' rear rotor upgrade).

Fits the following Cooper S models:

2007-2013 R56 MINI Cooper S Hatchback
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertibles
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster

For the Cooper (non-S) model, see G2NMB2003.

Cooper kit includes two new Caliper Brackets to accept the larger rotors.

Cross-drilled for enhanced performance, these JCW ventilated FRONT brakes rotors always provide immediate response with plenty of bite.

Stock rear rotors available here.

For improved pedal feel, take a look at the Stainless Steel Braided Brake Lines.

Redstuff Ceramic - 3000 Series Performance Brake Pads - For Highly Tuned Cars and Fast Street.

This material is an Aramid fibre based brake compound enhanced with ceramic particles. Updated from the previous generation pre-ceramic compound, this material is light years ahead. It lasts longer, it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads.

Features:
* High Initial Brake Effect
* Strong Resistance To Fade Under Load
* Reduced Rotor Wear
* Low Dusting Of Wheels
* Shimmed; Chamfered; And Slotted
* Features EBC Brake-In Coating For Fast Break In
* Zero Noise And Extended Lifetime
* Accepts factory brake wear sensor

NOTE:
Brakes are a safety critical part of your vehicle and should be installed by a competent mechanic following vehicle manufacturers installation procedure. The surface of these brake pads is coated with a red coating known as BRAKE-IN. This coating helps your newly installed brake pads to 'seat' or bed-in quickly. However, pads should be used gently for the first 100 miles until optimum braking is observed. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

Follow manufacturers instructions for 'bedding in' new pads.
Not for track use.

If your Brake Wear Warning light is illuminated, you need to replace the Brake Wear Sensor OEM.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Performance Brake Rotors for MINI Cooper
Created: January 22, 2020
Find high performance brake rotors for your BMW MINI Cooper & Cooper S. Shop popular brands such as Brembo, StopTech and Wildwood for sport/street use. We carry options for track, full race, & autocross.
Making Your MINI Cooper More Responsive
Created: November 11, 2013
Making Your MINI More Responsive In an earlier section of this book, we suggested that you could enhance the performance of your MINI by making a few changes to the engine, upgrading the air intake, supercharger, ECU, and exhaust. We think that any MINI on the street can benefit from the added hor...
EBC Street Brake Pad - Bedding In Process
Created: August 25, 2011
See the Bed-In procedure below for Street EBC Brake Pads