× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
This Lightweight Crankshaft Pulley is stock diameter (OEM sized) crank pulley, utilizing the original belt layout. Since the crank pulley diameter is unchanged, they maintain alternator output at exactly stock output levels so you need not worry about flat batteries or weak charging capabilities. Through extensive weight savings afforded by 6061 aircraft aluminum construction, power gains of up to 10% are available depending on how your MINI is set up. CravenSpeed crank pulleys come fully balanced and counter-weighted, and feature anodizing for superb wear resistance & strength.

Fits:

2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper S Convertible

Weight = 1.10 lbs.

For the 2% Oversized pulley, see NME5039.

NOT compatible with Cooper (non-S) models.

Releasing Power

The rule of thumb is that each pound of weight taken off the engines rotating assembly is worth approximately 2.7HP. The concept is that the crank is a parasite; it does not put power to the drivetrain but still requires the energy produced by the engine to rotate. When you reduce this parasitic weight, you release power that was previously used only for spinning the supercharger and alternator.

Is this crank pulley safe?

The pulleys on the R53's 1.6 and most new smaller engines have an elastomer (rubber ring) incorporated into the pulley that looks similar to a harmonic damper. The elastomer in the OEM pulley serves as an isolator, which is there to suppress natural vibration and noise from the engine itself, the A/C compressor, P/S pump, and alternator. The purpose of a traditional harmonic damper is to protect against crank failure from torsional movement. This is not necessary in the MINI or most modern engines because of the many advances in engine design and materials. Factors such as stroke, displacement, inline, V configurations, power output, etc., do determine when and how these harmonics and torsional movements occur.

Tools for removing and installing the pulley can be found below:
NME5031 Crank Pulley wrench
NME5032 Crank Pulley Removal Tool
NME5033 Pulley installer tool

For the factory replacement Bolt for the crank pulley, see NME7649 - Torque Bolt to 115 Nm or 85 ft-lb.

For the original OEM replacement, see MINI Cooper OEM Vibration Damper.

For an upgrade options, see Mini Cooper Super Damper Harmonic Crank Pulley.

For another upgrade options, see Mini Cooper PRW Fluid Filled Harmonic Damper.

MINI Cooper Lightweight Crank Pulley Upgrade for R52 & R53

MINI Cooper Lightweight Crank Pulley Upgrade for R52 & R53

MINI Cooper Lightweight Crank Pulley Upgrade for R52 & R53
Selected: MINI Cooper Crank Pulley -Standard
Part No: NME5038
$167.09
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later
Alternate Products
Crank Pulley Harmonic Super Damper® MINI Cooper S R52 R53 Gen1
$521.04 Crank Pulley Harmonic Super Damper® MINI Cooper S R52 R53 Gen1
Mini Cooper Crank Pulley PRW Harmonic Damper R53 Cooper S
$423.13 Mini Cooper Crank Pulley PRW Harmonic Damper R53 Cooper S
This Lightweight Crankshaft Pulley is 2% larger than stock diameter crank pulley, utilizing the original belt layout. Through extensive weight savings afforded by 6061 aircraft aluminum construction, power gains of up to 10% are available depending on how your MINI is set up. CravenSpeed crank pulleys come fully balanced and counter-weighted, and feature anodizing for superb wear resistance & strength.

Fits:

2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper S Convertible

For the Standard (sotck) Diameter pulley, see NME5038.

NOT compatible with Cooper (non-S) models.

Releasing Power

The rule of thumb is that each pound of weight taken off the engines rotating assembly is worth approximately 2.7HP. The concept is that the crank is a parasite; it does not put power to the drivetrain but still requires the energy produced by the engine to rotate. When you reduce this parasitic weight, you release power that was previously used only for spinning the supercharger and alternator.

Is this crank pulley safe?

The pulleys on the R53's 1.6 and most new smaller engines have an elastomer (rubber ring) incorporated into the pulley that looks similar to a harmonic damper. The elastomer in the OEM pulley serves as an isolator, which is there to suppress natural vibration and noise from the engine itself, the A/C compressor, P/S pump, and alternator. The purpose of a traditional harmonic damper is to protect against crank failure from torsional movement. This is not necessary in the MINI or most modern engines because of the many advances in engine design and materials. Factors such as stroke, displacement, inline, V configurations, power output, etc., do determine when and how these harmonics and torsional movements occur.

Tools for removing and installing the pulley can be found below:
NME5031 Crank Pulley wrench
NME5032 Crank Pulley Removal Tool
NME5033 Pulley installer tool

For the MINI Factory Vibration Damper replacement, see NME7647.

For a lightweight Harmonic Damper Upgrade, see NME5075.

For the Fluid Filled Harmonic Damper upgrade, see NME5080.

For the factory replacement Bolt for the crank pulley, see NME7649.

This Lightweight Crankshaft Pulley is stock diameter (OEM sized) crank pulley, utilizing the original belt layout. Since the crank pulley diameter is unchanged, they maintain alternator output at exactly stock output levels so you need not worry about flat batteries or weak charging capabilities. Through extensive weight savings afforded by 6061 aircraft aluminum construction, power gains of up to 10% are available depending on how your MINI is set up. CravenSpeed crank pulleys come fully balanced and counter-weighted, and feature anodizing for superb wear resistance & strength.

Fits:

2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper S Convertible

Weight = 1.10 lbs.

For the 2% Oversized pulley, see NME5039.

NOT compatible with Cooper (non-S) models.

Releasing Power

The rule of thumb is that each pound of weight taken off the engines rotating assembly is worth approximately 2.7HP. The concept is that the crank is a parasite; it does not put power to the drivetrain but still requires the energy produced by the engine to rotate. When you reduce this parasitic weight, you release power that was previously used only for spinning the supercharger and alternator.

Is this crank pulley safe?

The pulleys on the R53's 1.6 and most new smaller engines have an elastomer (rubber ring) incorporated into the pulley that looks similar to a harmonic damper. The elastomer in the OEM pulley serves as an isolator, which is there to suppress natural vibration and noise from the engine itself, the A/C compressor, P/S pump, and alternator. The purpose of a traditional harmonic damper is to protect against crank failure from torsional movement. This is not necessary in the MINI or most modern engines because of the many advances in engine design and materials. Factors such as stroke, displacement, inline, V configurations, power output, etc., do determine when and how these harmonics and torsional movements occur.

Tools for removing and installing the pulley can be found below:
NME5031 Crank Pulley wrench
NME5032 Crank Pulley Removal Tool
NME5033 Pulley installer tool

For the factory replacement Bolt for the crank pulley, see NME7649 - Torque Bolt to 115 Nm or 85 ft-lb.

For the original OEM replacement, see MINI Cooper OEM Vibration Damper.

For an upgrade options, see Mini Cooper Super Damper Harmonic Crank Pulley.

For another upgrade options, see Mini Cooper PRW Fluid Filled Harmonic Damper.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...