
Select your car:

Select

Select

Select
Selected: GWP134

Water pump fits 998cc-1275cc
Part No:
GWP134
In Stock
Internet Price
$32.95
Select variations below for more information:

Water pump fits 998cc-1275cc
$32.95

Aftermarket Water Pump, No Bypass
$31.95

Water Pump - No Bypass
$32.95

Water Pump - Twin Point Fuel Injection Minis Only
$39.95

Water Pumps for Small Bore Engines to 1098cc
$39.95

Uprated Water Pump For Twin Point MPI Minis
$44.95

Uprated Water Pump, No Bypass
$43.95

Uprated 998cc-1275cc Water Pump
$43.95
Alternate Products

$39.95
Austin Mini Small Bore Water Pump

$25.95
Classic Austin Mini Water Pump Fitting Kit For Gwp132/34
It's warmer here than in the UK. This higher capacity water pump moves more coolant than the stock one, and is better quality. GWP134 has by-pass hose take off, GWP154 is without take off. These super high quality water pumps have a much larger than stock impeller; it sticks into the block slightly more than 1/2". This water pump will fit all 1275cc blocks and all 998cc blocks after 1969, and with a slight amount of work on the impeller can be made to fit a small bore block. Use of a high capacity water pump helps to reduce cavitation in the water jacket, particularly at high RPM, as well as circulating a greater volume of coolant. Further reduction of cavitation is achieved by using a large diameter water pump pulley CAM6408 as originally fitted to the Cooper S and reintroduced on the A-Plus engines. It is necessary to check clearance between the large pulley and the head; if a lot of material has been machined from the head face it may foul the pulley. Small bore engines with 12G940 heads can't use CAM6408 and it is necessary to modify the top edge of the high capacity water pump or the 12G940 head will rest on the pump and not seal properly; modify for at least 1/16" gap. Also fits Sprite & Midget 1098cc and 1275cc engines. Will also fit 948cc but slight mods to the black may be required - check fitment carefully. Includes water pump gasket.
It's warmer here than in the UK. This higher capacity water pump moves more coolant than the stock one, and is better quality. GWP134 has by-pass hose take off, GWP154 is without take off. These super high quality water pumps have a much larger than stock impeller; it sticks into the block slightly more than 1/2". This water pump will fit all 1275cc blocks and all 998cc blocks after 1969, and with a slight amount of work on the impeller can be made to fit a small bore block. Use of a high capacity water pump helps to reduce cavitation in the water jacket, particularly at high RPM, as well as circulating a greater volume of coolant. Further reduction of cavitation is achieved by using a large diameter water pump pulley CAM6408 as originally fitted to the Cooper S and reintroduced on the A-Plus engines. It is necessary to check clearance between the large pulley and the head; if a lot of material has been machined from the head face it may foul the pulley. Small bore engines with 12G940 heads can't use CAM6408 and it is necessary to modify the top edge of the high capacity water pump or the 12G940 head will rest on the pump and not seal properly; modify for at least 1/16" gap. Also fits Sprite & Midget 1098cc and 1275cc engines. Will also fit 948cc but slight mods to the black may be required - check fitment carefully. Includes water pump gasket.
-
Price : $69.95
-
Price : $4995
-
Price : $74.95
-
Price : $7994.95
-
Price : $18995.95
Recommended items for: GWP134
-
Price : $25.95
-
Price : $4.95
-
Price : $2.95
-
Price : $74.95
Also Purchased with: GWP134
Loading...

Loading...
No Cars Defined