× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI!

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties 

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019

Mini Cooper Gauge Kit P3cars Digital Gauge Kit Gen3 F55 F56 F57 thru 2019
Alternate Products
Mini Cooper Flexpod Dual Gauge Kits Gen3 F55 F56 F57
Mini Cooper Flexpod Dual Gauge Kits Gen3 F55 F56 F57

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI! Basic version without vent or other options.

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

This product is the Gauge Module only (does not include Vent trim).  This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties. Get the G3NME7000 Boost Sensor Tap Adapter to provide a vacuum source for the Boost Sensor. 

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI! Pre-installed in the vent for simpler installation.

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

This is the Gauge Module Pre-Installed into the Vent trim. This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties. Get the G3NME7000 Boost Sensor Tap Adapter to provide a vacuum source for the Boost Sensor.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI! Pre-installed in the vent plus the Analog Boost Sensor option.

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

This product is the Gauge Module Pre-Installed into the Vent trim with the Analog Boost Sensor option. This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the 80psi Analog Boost Sensor.  This is appropriate for Modified or Highly Tuned MINI and provides a more accurate Boost reading.  Highly recommended if you have 'piggy-back' devices that intercepts and modifies boost signals.  Get the G3NME7000 Boost Sensor Tap Adapter to provide a vacuum source for the Boost Sensor.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties. Get the G3NME7000 Boost Sensor Tap Adapter to provide a vacuum source for the Boost Sensor.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI! Pre-installed in the vent plus Analog Boost Sensor option and the Ethanol Sensor Voltage Adapter.

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

This product is the Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included. Get the G3NME7000 Boost Sensor Tap Adapter to provide a vacuum source for the Boost Sensor.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties 

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

P3 DIGITAL MULTI-GAUGE FOR YOUR 3RD GENERATION F-SERIES MINI!

P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible

Left Hand drive models only.

All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.

P3 V3 Gauge Features
(all readouts can be individually configured to read in either Imperial or Metric units)

  • Plug and Play install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor 
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

AVAILABLE IN THE FOLLOWING CONFIGURATIONS:

Gauge module only
This is the basic P3Cars Digital Multi-Gauge product that you install into the existing Vent Trim in you MINI. 

Gauge module pre-installed with the Vent Trim
This version comes with the P3Cars Digital Multi-Gauge already installed into a new Vent Trim. You simply remove the existing vent trim and installed the pre-installed module with vent trim.

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option
This is the Pre-Installed P3Cars Digital Multi-Gauge product plus the Analog Boost Sensor which plugs directly into gauge harness, no wiring required. Also includes approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties 

Gauge module pre-installed with the Vent Trim plus the Analog Boost Sensor option and Ethanol Sensor Voltage Adapter (ESVA)
Allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included

WHY CHOOSE P3 GAUGES?

You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

 

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...