This is not a simple rubber strip, but a textured injection molded Thermal Plastic Elastomer (TPE) - this means it has 'some' flex to it and is VERY durable. This WILL protect the surface it covers.

This bumper guard is 30" wide and 2-5/8" deep.

Fits:

2013-2016 R61 MINI Cooper and Cooper S Paceman

Installation is very simple:

1. Thoroughly wash, clean and dry the surface.
2. Use the enclosed alcohol 'wipees' to wipe and dry the surface.
3. Try a 'dry fit' so you can identify the centered position.
4. Remove the backing from the 3M double-sided adhesive.
5. Carefully apply to surface.

This is not a simple rubber strip, but a textured injection molded Thermal Plastic Elastomer (TPE) - this means it has 'some' flex to it and is VERY durable. This WILL protect the surface it covers.

This bumper guard is 30" wide and 2-5/8" deep.

Fits:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2012-2015 R58 MINI Cooper and Cooper S Coupe

Installation is very simple:

1. Thoroughly wash, clean and dry the surface.
2. Use the enclosed alcohol 'wipees' to wipe and dry the surface.
3. Try a 'dry fit' so you can identify the centered position.
4. Remove the backing from the 3M double-sided adhesive.
5. Carefully apply to surface.

This is not a simple rubber strip, but a textured injection molded Thermal Plastic Elastomer (TPE) - this means it has 'some' flex to it and is VERY durable. This WILL protect the surface it covers.

This bumper guard is 37" wide and 3-1/8" deep.

Fits:

2011-2016 R60 MINI Cooper and Cooper S Countryman

Installation is very simple:

1. Thoroughly wash, clean and dry the surface.
2. Use the enclosed alcohol 'wipees' to wipe and dry the surface.
3. Try a 'dry fit' so you can identify the centered position.
4. Remove the backing from the 3M double-sided adhesive.
5. Carefully apply to surface.