Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010

Mini Cooper Turbo N14 Refurbished Gen2 2007-2010
Select from variations below for more information:
Alternate Products
Mini Cooper Turbo N14 Oem Replacement Gen2 2007-2010
$2325.95 Mini Cooper Turbo N14 Oem Replacement Gen2 2007-2010
MINI COOPER S TWIN SCROLL TURBOCHARGER BORG WARNER - R55/56/57/58/59/60/61
$995.95 MINI COOPER S TWIN SCROLL TURBOCHARGER BORG WARNER - R55/56/57/58/59/60/61

JMTC Refurbished Turbo for your 2nd Generation Turbocharged Cooper S with the N14 engine! This is a great upgrade for any stock unit and "Direct Replacement" using the same K03 Turbo as stock but with a slight upgrade in performance (slightly larger compressor section). Engineered to be a reliable and high-performance! If your Turbo has 'bit the dust' - why not give it a bump in performance? 

NOTE: Photos and images shown are approximations of the product and may not represent the actual product.

WHY CHOOSE THESE UNITS?

SAVE $$$ !!! Borg Warner supplies their K03 Turbocharger units to MINI for these models. These are the same Borg Warner units that have been Refurbished. Units are completely overhauled including replacement of all internal wearable items such as Turbine Shaft Bearings and Steel Thrust Plates. After the rebuild all internal components are triple balanced which is one step better then the manufacturer's dual balance process. Any components that do not meet JMTC's stringent standards will be replaced. Some parts that are damaged beyond repair may be replaced with JMTC parts but will retain the full One Year Limited Warranty.

Although the refurbished units are thoroughly cleaned, if you are concerned with some minor cosmetic scratches, dents, and other imperfections from previous use, choose the new units.

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Include the last 7-digits of your VIN when ordering.

See the Turbo Application Guide to see all the options for replacement and upgraded Turbo's.

For Turbo related replacement hardware, see our Mini Cooper Turbo Installation Hardware Application Guide.

TURBOCHARGER DETAILS

JMTC Cooper S Turbo

The JMTC's NEW high-flow twin scrolling turbine uses the extended tip compressor to give you boost that starts early and last long. This turbocharger delivers outstanding response with torque and power gains across the entire power-band. It will deliver great torque, spool early, and last into the higher RPMs. For this turbo to reach its full potential we recommend one of our aftermarket exhaust system which will allow this turbo to reach its full power capacity. Engineered to be a reliable and high-performance upgrade turbo for the 2007+ Mini (up to 220hp) with a lower cost.

[ ] Larger 38mm compressor
[ ] Extended tip compressor wheel
[ ] High temperature alloy turbine housing
[ ] Twin scroll turbine housing
[ ] Water cooled bearing housing

Maximize your power gains with the ECU upgrade from the supplier of these Turbo upgrades.

CORE DEPOSIT

Additional Core Deposit is charged with every Turbo order. Core charges are refunded when a 'Rebuildable' core from your MINI is returned and inspected by the manufacturer.

All or part of the core deposit may be forfeited if the core is severely damaged and not rebuildable

The amount of core refund is determined at the discretion of the Turbo Manufacturer.

IMPORTANT INFORMATION

Read the Manufacturer's Installation Requirements below - THESE ARE REQUIREMENTS YOU MUST FOLLOW IN ORDER TO VALIDATE THE MANUFACTURER'S LIMITED WARRANTY - NO EXCEPTIONS.

Also read the related Tech Articles listed at the bottom of this page.

Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.

OTHER PARTS TO CONSIDER

Gaskets, seals, studs, and other hardware are NOT included. If you need to replace these items, order separately.

See our Turbo Install Kit. This kit includes all the most commonly replaced gaskets and seals, plus a new oil supply line. Additional gaskets, seals and other hardware may be required depending on the installation.

When servicing the Turbo on the MINI, it is very important (maybe even critical) that you replace the Turbo Oil Supply line to avoid potential future turbo issues.  (Included in the Turbo Install Kit).

Over time, the turbo and turbo supply line builds a fine layer of 'coked' or cooked oil on the internal surfaces. When you remove the supply line from the turbo, this disrupts the continuity of the coked layer with great potential of some of the coking to flake free. These coked oil particles can easily clog the fine journals that feed oil to the turbo bearings. Once the the oil flow is compromised, it is only a matter of time for cascading failures that can damage the turbo and catalytic converter! Don't take a chance - REPLACE the Oil Supply Line ! ! !

For additional protection, take a look at the Turbo Oil Supply Line Thermal Wrap.

For other TURBOCHARGER related products, see our TURBOCHARGER products page.

OUR ADVICE ON DRIVING A TURBOCHARGED MINI

We STRONGLY recommend you change the motor oil more frequently than the factory recommendation. Anecdotal evidence suggests Turbo's with more frequent oil changes have fewer issues. We suggest 5000 mile oil change interval or less. Make sure you use FULL SYNTHETIC motor oil with the ACEA (Association des Constructeurs Europeens d'Automobiles) A3/B3 specification.

After a long or hard drive, drive 'easy' for a while just before your destination. This will reduce the engine and oil temperatures to lower operating levels. Also make a habit to let the engine idle for a couple minutes before shutting off. This will help cool the turbo preventing oil coking in the journals and bearings. Yes, the MINI has an auxiliary water pump that runs after shutdown to help cool the turbo, BUT - the oil isn't cirulating - it just sits there waiting for the turbo to cool. This is why we recommend you idle before shutdown - let the oil circulate while the temperature comes down.

MANUFACTURER'S INSTALLATION REQUIREMENTS to validate Manufacturers Limited Warranty: 

[ ] Replace the turbo oil supply line with the turbo.
- - - Due to excess heat round the turbocharger and particulates suspended in the turbo supply oil the oil will harden or "coke~ in the turbo and oil supply lines. If the oil supplyline is not replaced with the turbocharger the coked oil will break free from the side walls of the oil supply line and damage the turbocharger bearings. Cleaning the oil line will not help and only aggravate and increase the likelihood of the turbo failure due to coked oil breaking free form the sidewall.

[ ] Replace the catalytic converter on mini coopers before installing a new turbo.
- - - The Catalytic converter may look clear but if any oil leaked into it some of the holes might be blocked and will cause back pressure. This starts to happen on Mini Coopers at 15k miles! Exhaust back pressure causes premature failure of the turbocharger. Turbochargers are not designed to have pressure on the exhaust side. As an alternative, have your catalytic converter refurbished to restore original flow.

[ ] Prime the turbocharger.
- - - No oil on the turbocharger bearings will cause failure of the bearings if they are dry even for a short period of time. Prime the new turbo with oil before you connect the oil lines.  For maximum protection, see Turbo Additive for Priming New Turbo's

[ ] Fresh engine oil with a turbocharger change
- - - Perform an oil change with full synthetic motor oil at the factory recommended viscosity when you install a new turbo. Change the oil again after one heat cycle if:  the engine is brand new, newly rebuilt, or if your MINI had a catastrophic turbo failure.

MANUFACTURERS WARRANTY STATEMENT

Manufacturers Limited Warranty covers all turbochargers to be free of defects in materials and workmanship for normal use and service up to 1 year (2 years if the oil line is replaced) after retail purchase. Manufacturer reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. Manufacturer liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts.

Labor and storage charges are not products of the manufacturer and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer and is a sole responsibility of the buyer. Manufacturer will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subjected to this warranty. No warranty claim or refund, will be given until the item is in our possession and we have processed it which can take up to 20days.

Before installing any of our products it is the responsibility of the installer/owner to fix or resolve any and all problems that cause the original part/item to fail and can cause the new part/item to fail. Since we do not troubleshoot, we take no responsibility for incorrectly diagnosing the issue that caused the initial part/item to fail. There are no warranties expressed or implied beyond those set forth above.

LEARN MORE ABOUT TURBOCHARGERS

Take a look at these informative videos that will help you avoid potential pitfalls with the Turbo:

How to Kill a New Turbo Part 1 - Oil Line

How to Kill a New Turbo Part 2 - Catalytic Converter

How to Kill a New Turbo Part 3 - No or Low Oil

How to Kill a New Turbo Part 4 - Using the Correct Oil

NOTE: Some states (like California) have ever tightening requirements for emissions testing and inspections. Always check your local regulations on compliance for street use.



Loading...
Loading...
Loading...
This Item (G2NME2824R) Fits the following cars:
  • 2010
  • MINI Cooper
  • R55 Clubman
  • Automatic
  • 2010
  • MINI Cooper
  • R55 Clubman
  • Manual
  • 2010
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Automatic
  • 2010
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Manual
  • 2010
  • MINI Cooper
  • R57 Convertible
  • Automatic
  • 2010
  • MINI Cooper
  • R57 Convertible
  • Manual
  • 2010
  • MINI Cooper S
  • R55 Clubman
  • Automatic
  • 2010
  • MINI Cooper S
  • R55 Clubman
  • Manual
  • 2010
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Automatic
  • 2010
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Manual
  • 2010
  • MINI Cooper S
  • R57 Convertible
  • Automatic
  • 2010
  • MINI Cooper S
  • R57 Convertible
  • Manual
  • 2009
  • MINI Cooper
  • R55 Clubman
  • Automatic
  • 2009
  • MINI Cooper
  • R55 Clubman
  • Manual
  • 2009
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Automatic
  • 2009
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Manual
  • 2009
  • MINI Cooper
  • R57 Convertible
  • Automatic
  • 2009
  • MINI Cooper
  • R57 Convertible
  • Manual
  • 2009
  • MINI Cooper S
  • R55 Clubman
  • Automatic
  • 2009
  • MINI Cooper S
  • R55 Clubman
  • Manual
  • 2009
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Automatic
  • 2009
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Manual
  • 2009
  • MINI Cooper S
  • R57 Convertible
  • Automatic
  • 2009
  • MINI Cooper S
  • R57 Convertible
  • Manual
  • 2008
  • MINI Cooper
  • R55 Clubman
  • Automatic
  • 2008
  • MINI Cooper
  • R55 Clubman
  • Manual
  • 2008
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Automatic
  • 2008
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Manual
  • 2008
  • MINI Cooper S
  • R52 Convertible
  • Automatic
  • 2008
  • MINI Cooper S
  • R52 Convertible
  • Manual
  • 2008
  • MINI Cooper S
  • R55 Clubman
  • Automatic
  • 2008
  • MINI Cooper S
  • R55 Clubman
  • Manual
  • 2008
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Automatic
  • 2008
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Manual
  • 2007
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Automatic
  • 2007
  • MINI Cooper
  • R56 Hatchback/Hardtop
  • Manual
  • 2007
  • MINI Cooper S
  • R52 Convertible
  • Automatic
  • 2007
  • MINI Cooper S
  • R52 Convertible
  • Manual
  • 2007
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Automatic
  • 2007
  • MINI Cooper S
  • R56 Hatchback/Hardtop
  • Manual
Related Technical Articles:
Turbo Installation Hardware for your MINI Cooper
Created: March 18, 2016
Mini Cooper Turbo Installation hardware applications guide lists turbo related hardware you might need when you service the turbo
MINI Cooper Engine Comparison N14 vs N18
Created: March 05, 2015
The Mini Cooper engine comparison allows for a better understanding of the N14 and N18 engines from BMW
Guide on How to Find the Right Turbo for MINI Cooper S or JCW
Created: June 25, 2015
Browse our Mini Cooper Turbo Application Guide. When replacing a Turbo, there are many options to choose from. This chart shows which turbos are appropriate for the type of replacement and the applicable model years. It helps making finding your turbo easy.
Loading...
Loading...
Loading...
Recently Viewed Items