× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

MINI Factory OEM 'Pre-Cat' O2 Sensor (Lambda Sensor) for 2007-2010 Cooper models (non-S). This is O2 sensor located BEFORE the catalytic converter.

Length = 320mm (about 12.6")

Fits the following Cooper (non-S) models with the N12 engine:

2007-2010 R56 MINI Cooper Hatchback
2008-2010 R55 MINI Cooper CLUBMAN
2009-2010 R57 MINI Cooper Convertibles.

For other O2 sensors for other models & production dates, part G2NME2030-P.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs O2 sensor, part NME6023.

Genuine OEM Part Oem Oxygen Sensor Pre-cat N12 Engine Mini Cooper Non-s R55 R56 R57 Gen2

Oem Oxygen Sensor Pre-cat N12 Engine Mini Cooper Non-s R55 R56 R57 Gen2

Oem Oxygen Sensor Pre-cat N12 Engine Mini Cooper Non-s R55 R56 R57 Gen2

Oem Oxygen Sensor Pre-cat N12 Engine Mini Cooper Non-s R55 R56 R57 Gen2

Oem Oxygen Sensor Pre-cat N12 Engine Mini Cooper Non-s R55 R56 R57 Gen2
Selected: Pre-Cat Cooper non-S R55 R56 R57 2007-2010
Part No: G2NME2031
$374.19
Qty:
Fits the following:
MINI (2002-Current)
Alternate Products
Oxygen Sensor pre-Cat N12 engine Value Priced MINI Cooper Non-S R55 R56 R57 2007-2010 Gen2
$160.36 Oxygen Sensor pre-Cat N12 engine Value Priced MINI Cooper Non-S R55 R56 R57 2007-2010 Gen2
MINI Factory OEM replacement 'Pre-Cat' O2 Sensor (Lambda Sensor) for the 2007-2010 Cooper S models. This is a O2 sensor located BEFORE the catalytic converter.

Length = 710mm (about 28")

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Also fits the following models with the 710mm sensors:

2012-2013 JCW R58 Cooper S COUPE
2012-2013 JCW R59 Cooper S Roadster

For other models & production dates, see G2NME2030-P.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs, see NME6023.

Factory replacement 'Post-Cat' O2 Sensor (Lambda Sensor). This is the O2 sensor located AFTER the catalytic converter.

Length = 475mm (about 18.7")

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2013-2016 R61 MINI Cooper and Cooper S Paceman
2011-2016 R60 MINI Cooper and Cooper S Countryman

For listing of all O2 Sensors, see G2NME2030-P.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs, see NME6023.

Factory OEM replacement 'Pre-Cat' O2 Sensor (Lambda Sensor) for the 2011+ Cooper S models. This is the O2 sensor located BEFORE the catalytic converter.

Length = 500mm (about 19.7")

Fits the following Cooper S models with the N18 engine:

2011-2013 R56 MINI Cooper S Hardtop
2011-2014 R55 MINI Cooper S Clubman
2011-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Also fits the following models with the 500mm sensors:

2012-2013 JCW R58 Cooper S COUPE
2012-2013 JCW R59 Cooper S Roadster

For listing of all O2 Sensors, see G2NME2030.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs, see NME6023.

Factory replacement 'Pre-Cat' O2 Sensor (Lambda Sensor) for the 2011-2013 Cooper (non-S) models. This is the O2 sensor located BEFORE the catalytic converter.

Length = 320mm (about 12.6")

Fits the following Cooper (non-S) models with the N16 engine:

2011-2013 R56 MINI Cooper Hardtop
2011-2014 R55 MINI Cooper Clubman
2011-2015 R57 MINI Cooper Convertible
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

Forlisting of all O2 Sensors, see G2NME2030.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs, see NME6023.

MINI Factory OEM 'Pre-Cat' O2 Sensor (Lambda Sensor) for 2007-2010 Cooper models (non-S). This is O2 sensor located BEFORE the catalytic converter.

Length = 320mm (about 12.6")

Fits the following Cooper (non-S) models with the N12 engine:

2007-2010 R56 MINI Cooper Hatchback
2008-2010 R55 MINI Cooper CLUBMAN
2009-2010 R57 MINI Cooper Convertibles.

For other O2 sensors for other models & production dates, part G2NME2030-P.

About O2 sensors:

An O2 sensor (lambda sensor) has an expected life span of about 30,000 to 50,000 miles. Sensors may fail prematurely if clogged with carbon, or contaminated by lead from leaded gas or silicone from an antifreeze leak or from silicone sealer.

O2 sensors become sluggish as they age. Eventually the signal does not change at all. When this happens, the EML and/or check engine light may come on, and the engine may experience drivability problems or damage caused by an overly rich fuel condition. High fuel consumption, high CO and HC emissions, poor idle, and/or hesitation during acceleration are typical complaints.

If the average voltage from the O2 sensor is running high (more than 0.50V), it indicates a rich condition, possibly due to a bad MAP, sensor or leaky injector. If the average voltage reading is running low (less than 0.45V), the mixture is running lean possibly due to a vacuum leak or because the sensor itself is bad. If the O2sensor continually reads high (rich), it will cause the engine computer to lean out the fuel mixture in an attempt to compensate for the rich reading. This can cause lean misfire, hesitation, stumbling, poor idle, high hydrocarbon emissions (from misfiring) and engine damage.

If the O2 sensor continually reads low (lean), it will cause the engine computer to enrichen the fuel mixture. Injector pulse width will be increased causing fuel consumption and carbon monoxide emissions to go up. Especially in a performance tuned vehicle, a constantly rich fuel mixture can cause the catalytic converter to overheat and it may be melted.

For 02-06 Gen 1 MINIs O2 sensor, part NME6023.

Recommended items for: G2NME2031
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...