× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Hiqh quality Zimmermann replacement brake rotors. Offers similar performance to stock rotors - at a lower cost!

Fits the following models:

2007-2013 R56 Cooper and Cooper S Hardtop
2008-2014 R55 Cooper and Cooper S Clubman
2009-2015 R57 Cooper and Cooper S Convertibles
2012-2015 R58 Cooper and Cooper S Coupe
2012-2015 R59 Cooper and Cooper S Roadster

Cooper S front rotors will also fit 2002-2006 R50 MINI Cooper and R53 Cooper S Hatchbacks and 2005-2008 R52 MINI Cooper and Cooper S WITH the JCW Sport Brake Kit option (with the Red Calipers in front).

STOCK ROTOR SIZES   
 MODEL  FRONT REAR
 COOPER  280 x 22mm 259 x 10mm
 COOPER S  294 x 22mm


Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

Select Model and Position from the pull-down menu.

For a complete kit including these rotors, pads, and sensors, see G2NMK2055 and G2NMK2057.

For a listing of factory replacement rotors, see G2NMB3000.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

If your brake wear warning light is illumninated, see replacement sensors.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

MINI Cooper Brake Rotors Zimmerman Gen2 R55-R59

MINI Cooper Brake Rotors Zimmerman Gen2 R55-R59

MINI Cooper Brake Rotors Zimmerman Gen2 R55-R59

MINI Cooper Brake Rotors Zimmerman Gen2 R55-R59

MINI Cooper Brake Rotors Zimmerman Gen2 R55-R59
Alternate Products
Brake Rotor OEM | Gen2 MINI Cooper & S R55-R59
Brake Rotor OEM | Gen2 MINI Cooper & S R55-R59
Hiqh quality replacement Cooper non-S Front Brake Rotors (280 x 22mm) from Zimmerman. Offers similar performance to stock rotors - at a lower cost!

Fits the following Cooper (non-S) models:

2007-2013 R56 Cooper Hardtop
2008-2014 R55 Cooper Clubman
2009-2015 R57 Cooper Convertibles
2012-2015 R58 Cooper Coupe
2012-2015 R59 Cooper Roadster 

STOCK ROTOR SIZES
MODEL FRONT REAR
COOPER 280 x 22mm 259 x 10mm
COOPER S 294 x 22mm


Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per pair. Comes with anti-corrosion coating.

For a listing of all Zimmerman rotors, see G2NMB2070-P.

For a listing of factory replacement rotors, see G2NMB3000.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

If your brake wear warning light is illumninated, see replacement sensors.

 

ZIMMERMANN - Quality begins with the material.

 

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

Hiqh quality replacement Cooper S Front Brake Rotors (294 x 22mm) from Zimmerman. Offers similar performance to stock rotors - at a lower cost!

Fits the following Cooper S models:

2007-2013 R56 Cooper S Hardtop
2008-2014 R55 Cooper S Clubman
2009-2015 R57 Cooper S Convertibles
2012-2015 R58 Cooper S Coupe
2012-2015 R59 Cooper S Roadster

STOCK ROTOR SIZES
MODEL FRONT REAR
COOPER 280 x 22mm 259 x 10mm
COOPER S 294 x 22mm


Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per pair. Comes with anti-corrosion coating.

For a listing of all Zimmerman rotors, see G2NMB2070-P.

For a listing of factory replacement rotors, see G2NMB3000.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

If your brake wear warning light is illumninated, see replacement sensors.

 

ZIMMERMANN - Quality begins with the material.

 

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

Hiqh quality replacement Cooper and Cooper S Rear Brake Rotors (259 x 10mm) from Zimmerman. Offers similar performance to stock rotors - at a lower cost!

Fits the following models:

2007-2013 R56 Cooper and Cooper S Hardtop
2008-2014 R55 Cooper and Cooper S Clubman
2009-2015 R57 Cooper and Cooper S Convertibles
2012-2015 R58 Cooper and Cooper S Coupe
2012-2015 R59 Cooper and Cooper S Roadster

STOCK ROTOR SIZES
MODEL FRONT REAR
COOPER 280 x 22mm 259 x 10mm
COOPER S 294 x 22mm


Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per pair. Comes with anti-corrosion coating.

For a listing of all Zimmerman rotors, see G2NMB2070-P.

For a listing of factory replacement rotors, see G2NMB3000.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

If your brake wear warning light is illumninated, see replacement sensors.

 

ZIMMERMANN - Quality begins with the material.

 

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

Hiqh quality Zimmermann replacement brake rotors. Offers similar performance to stock rotors - at a lower cost!

Fits the following models:

2007-2013 R56 Cooper and Cooper S Hardtop
2008-2014 R55 Cooper and Cooper S Clubman
2009-2015 R57 Cooper and Cooper S Convertibles
2012-2015 R58 Cooper and Cooper S Coupe
2012-2015 R59 Cooper and Cooper S Roadster

Cooper S front rotors will also fit 2002-2006 R50 MINI Cooper and R53 Cooper S Hatchbacks and 2005-2008 R52 MINI Cooper and Cooper S WITH the JCW Sport Brake Kit option (with the Red Calipers in front).

STOCK ROTOR SIZES   
 MODEL  FRONT REAR
 COOPER  280 x 22mm 259 x 10mm
 COOPER S  294 x 22mm


Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

Select Model and Position from the Image List below or to the right.

For a complete kit including these rotors, pads, and sensors, see G2NMK2055 and G2NMK2057.

For a listing of factory replacement rotors, see G2NMB3000.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

If your brake wear warning light is illumninated, see replacement sensors.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Brake Rotor Upgrade and Replacement Guide
Created: June 22, 2015
Mini Cooper Brake Rotor Upgrade and Replacement Guide including solid, slotted, drilled, and slotted and drilled upgrades. Whether you do your performance upgrades or for looks, these rotors can improve braking performance while delaying the onset of brake fade.
MINI Cooper Brake Maintenance Parts- Most Popular
Created: August 26, 2014
Top Selling Brake Maintenance Items for your MINI Cooper
Created: December 12, 2013
Car Care products Fluids Adhesives Lube Improves Fuel Economy Maintain Brakes Maintain Engine Maintain Exterior Maintain InteriorTools ...