Thanks very much jedduh01. I got replacement gaskets for everything and I know that one is in there and I also have a replacement half moon seal.

It must have been left over from when I tore everything apart and I was assuming it was a separate gasket because of how cleanly it was stuck on. I couldn't find it anywhere and now I know why, LoL. 

Appreciate the help.

One gasket is on the front plate = behind the timing cover base plate  (flat paper gasket)
  
and then a Half moon shaped rubber seal is in place between the trans and the 'bearing cap'

https://www.minimania.com/part/12G619/Engine-Front-Plate-Gasket-For-Any-A-Series-Units-Pre-A-Plus

Item 29
https://www.minimania.com/CatPage/2-7/2/7/0/850cc-Mini--997cc-Cooper-Block


And the =

https://www.minimania.com/part/12G2947/Classic-Austin-Mini-Block-To-Transmission-Main-Seal--Ahu1959

That's weird, I just checked the link and the image popped up. 

I'll try posting it again, thanks for the heads up.

Crankshaft Cap?

There is no pic at your link that I could see

Hey all, 

I've finished the complete tear down of my mini and came across something that I need help with. I've looked through the Haynes manual as well as numerous google searches but can't find any info.

I've attached an image of what I believe is called the Big End Cap or possibly I'm confusing it with a Bearing Cap. As you can see there are remnants of a gasket that I scrapped off but I can't find anything about that part having a gasket.

Crankshaft Cap?

Am I missing something? Did the previous owner use a gasket instead of a thrust washer or am I confused as to what part it is and that's why I can't find it?

Thanks in advance as always.