They look like Siata Spring door hinges.

Have it built up, tigged, brazed welded whatever. & remachine

Unfortunately the actual hinge breaks into pieces. If you look at the longer piece at the part where the pin goes through you'll see it is broken. That part should be a complete circle.

If you have the original hinges but they are just worn at the pins try looking at the pin rebuild kits sold for the mini hinges, they may well work for your hinges?

These are the closest yet. Not a perfect match, but the nearest I have seen. May have to acquire a set and see if they will work.

Many thanks for the suggestion! 

Look at the whole Triumph range  TR2/3 boot and bonnet hinges are very similar.

Apologies for the oversight. The vehicle, as pictured, is a Zagato Zele, circa 1974, country of origin is Italy.

Much of the running gear of the Zele is Fiat, and rumors abound of the hinges being Fiat based as well but research and council with Fiat experts has not found a match there. I'm broadening my search in hopes that someone somewhere will possibly have a clue.

CNC looks more and more like the way these may have to appear! 

Triumph Spitfire trunk hinges ?

Worst case, with what you have there, it could re-made on a 3 axis CNC. Good luck.

A clue as to the vehicle's country of origin might help.

Looking for a match for the hinges I have pictured. Early Mini hinges look real close but are a couple inches longer than what I'm looking for. Hours and hours online have yielded a lot of 'pretty close' matches but none as I need.

Chuck from MiniMania suggested posting on here hoping that a renowned hingeologist might see then and make the world sane again

Any help, recommendation, or possible direction to search would be very much appreciated.