AHA!  I stupidly used the wrong differential housing.  I have three and I used the one for the sandwich plate.  I will swap it out and re-shim the diff.  Hopefully I can do it in a couple of hours.  If this does not work out I may take you up on the sandwich plate.  Thanks you guys!

Dogscarf
Working on 1967 Morris Cooper S (Aussie)

u-22g245 on this site is what he is looking for or
solid mount listed as not available.
I also have 3 used ones available

12G1318-USED  is this what you need?
7 has one...

Steve,  Thanks for the advice.  I will keep looking.  I took the damn thing apart, meaning remote from the 1128 gearbox last winter, so it should have had the sandwich spacer but I cannot seem to find it in my garages.  Thanks!

Dogscarf

Should we figure you have an AA type remote with the sandwich plate. The type that the bolts ( 8 ) go in from the side? I have a couple of the AA type remotes. I use the AA 1128 trannys to convert to magic wand four synchros. The sandwich plates I have are in real bad shape. The rubber has softened to the point the spacer is no longer useful. I burn the rubber out and clean the parts up. I forget dia. of the rod but I weld rod in place of the rubber and convert to a solid mount. Steve (CTR) 

Fellow Minioids, Does anybody have a remote adapter plate?  I need one.  Thanks!

Dogscarf