R58 MINI Endurance Coupe unveiled - Mini Mania

Today takes the wraps off of one of the most ambitious motorsport projects from the brand yet. This weekend MINI will be tackling the 24 Hours of the Nurburgring, perhaps the toughest and most difficult 24 hour race in the world. And to do it MINI has created an entirely new race car based on the R58 MINI JCW Coupe.
R58 MINI Endurance Coupe unveiled - Mini Mania
We have the full press release below but we can shed a bit more light on this car ourselves. A few weeks ago I had a chance to sit in the car and go over it in detail. In short this is unlike any MINI Challenge race-car ever made. It may look similar but it has much more extensive aero work along with a heavily revised 1.6L JCW engine. Like the Challenge race-car, the JCW Endurance uses a stock JCW engine. Unlike the Challenge car it doesn’t make due with merely 225 hp but instead over 250 hp.
R58 MINI Endurance Coupe unveiled - Mini Mania
Helping put this power down to the tarmac is MINI’s first sequential manual transmission. It’s a race transmission that is mounted on the dash just to the right of the steering wheel – very similar to last year’s ALMS/LeMans M3s. Shift times are measured in milliseconds.

Inside the cabin is sparse but perfectly laid out. I can tell you from experience that climbing into the car (especially for someone 6’2″) is not a thing of beauty. And getting out is even worse. But once you’re in the race seat and the controls seem to fit like a glove. However I do apologize for putting my size 13 pretty hard (by accident of course) into the key slot which was moved to the left of the steering wheel.
R58 MINI Endurance Coupe unveiled - Mini Mania
Even opening the door is a strangely new experience as it’s made entirely out of carbon fiber and weighs seemingly just a couple of pounds. I literally swung it open with a flick of my finger. Carbon fiber is also used on the hood and boot-lid to further reduce weight.
R58 MINI Endurance Coupe unveiled - Mini Mania
Unfortunately MINI doesn’t have any further plans for this car after the 24 Hours of the Nurburgring this weekend. In fact I specifically asked if this was the next Challenge car and got a resounding ‘no’. So what we have here is simply the fastest most ultimate of all ultimate MINIs. A true one-off (or 2-3 off from what we’ve heard) that will hopefully inform future race-cars and even production cars.



Official Release

Motor sport is in the MINI genes. And now the carmaker is set to add a new chapter to its racing heritage with the arrival of the MINI John Cooper Works Coupé Endurance. The newly developed racer will line up at this year’s 24-hour race at the Nürburgring-Nordschleife circuit, previewing the series-production version of the car due to be unveiled to the public in autumn 2011.

With the participation of the MINI John Cooper Works Coupé Endurance, the Nürburgring 24-hour race will be staging an automotive world premiere for the first time in its history. At the same time, the extreme demands of the classic endurance event ensure the new MINI model will be given a baptism of fire.

MINI’s declared aim in entering the Nürburgring 24-hour race is to experience the adventure of the “Green Hell”, as the Nürburgring-Nordschleife is affectionately known. And the brand has called, among other things, on the experience gained over many years of MINI Challenge sprint racing in the development of its new racing car for this unique event.

A pure-bred racing set-up will equip the MINI John Cooper Works Coupé Endurance for a full day lapping the combined Nordschleife/Grand Prix circuit at race speed. Providing the power is a specially-tuned version of the series- produced MINI John Cooper Works engine. The 1.6-litre four-cylinder unit – which boasts a twin-scroll turbocharger and petrol direct injection – delivers 250 hp, and the Overboost function pushes peak torque up to 330 Newton metres. Top speed is in excess of 240 km/h. With the over-boost function (the same found on the Cooper S and the JCW) it can get up to 243 lbs of torque.

The MINI John Cooper Works Coupé Endurance sees the brand’s customary go-kart feeling taken to a whole new level. The stiff race suspension ensures impressive roadholding and gives the driver constant, direct feedback from the road surface. Adjustable shock absorber units allow the suspension set-up to be adapted to fluctuating track conditions, a feature that will come in particularly handy at the Nordschleife.

The more steeply raked windscreen of the car’s flat coupé silhouette sets it apart clearly from the Hatch and helps to minimise aerodynamic drag, which the drivers will acknowledge with a smile on the circuit’s long straights. The John Cooper Works Aerodynamics Package further enhances the Coupé’s already supreme handling; the front spoiler, rear diffuser and adjustable rear wing generate downforce, optimising the balance between the front and rear axle.

The MINI John Cooper Works Coupé Endurance achieves an exceptionally high level of safety thanks to features including a roll cage welded to the body and a sports bucket seat with six-point safety belt and Formula One-style HANS (Head And Neck Support) system. When it comes to active safety, the car adopts the proven braking system with Race ABS from MINI Challenge racing and adds a specially tuned DSC dynamic control system, likewise optimised for the race track. Plus, in the interests of safety – and rapid pit stops – the MINI John Cooper Works Coupé Endurance is kitted out with an integrated pneumatic jack.