Factory manual recommends replacing the sealing washer when changing the oil. Since the washer is not available separately from the drain plug, we've created a convenient kit to include the filter with drain plug and sealing washer.

Filter change tips: It helps to 'loosen' the canister a bit when you drain the oil to help drain the filter (for less mess). Make sure you replace the o-ring with the new one supplied with the filter - apply a coat of fresh oil on the o-ring when you install it. Use the new drain plug with the new sealing washer.

Remember to use sythetic motor oil. MINI recommends 5W-40 or 5W-30 FULL SYNTHETIC motor oil.

Tighten the drain plug to (18 ft-lb). Start the engine and check for oil pressure. Don't forget to check for leaks too!

And darn it, dispose of the used oil and filter properly, please. And wipe that oil off the drive before you track it into the house!