The Power Slot slotting process removes far less of the rotor’s surface area than conventional cross drilling to help maintain the highest possible co-efficient of friction for the brake pads to work against. Slotted rotors trade only 3.7% of their surface area to the slots that vent the gasses, while drilled rotors sacrifice up to 7.75% of their surface area, and rotors that are both drilled and slotted sacrifice up to 9.38% of their surface area. Less surface area means less stopping friction.

Starting with select castings manufactured in Italy and the U. S., all Power Slot rotors are CNC machined to application specific tolerances that utilize a patent pending tapered-slot technology to create a vent for brake dust and pad gasses while preserving rotor strength.

The slot designs of Power Slot rotors are angled to use the rotors’ direction of rotation to enhance performance. This makes them side specific with left side (driver’s) and right side (passenger’s) rotors.

Brightly-plated Power Slot rotors also eliminate rusty rotor syndrome and enhance the look of custom wheels. Their military spec cadmium plating adds a high-tech appearance and corrosion resistance.

Power Slot rotors are designed to beat the challenges of high performance driving and severe duty brake demands, and represent one of the most cost-efficient performance brake upgrades offered in the market today.

IMPORTANT REMINDER: Slotted, drilled or dimpled rotors offered as OEM replacements should not be considered appropriate for high-speed track use.

While grooved, drilled and slotted rotors offer an enhanced appearance and add some resistance to the boundary layer of gasses that can build up between the pad and rotor, they are not designed to withstand the extreme temperatures that are produced on the racetrack. If they are used on the track, it is very important that the rotors be carefully inspected and should not be driven on if even minor signs of deterioration are seen. Note, too, that if any products are used on the track they are not warrantable.

See POWERSLOT NOTES for installation tips and break-in procedure.

Torque specifications:

Front :
disc to hub (torx) : 27 nm
caliper to steering knuckle : 110 nm
guide bolt (7mm) : 25-30 nm
dust shield : 8 nm

Rear :
disc to hub : 27 nm
caliper to trailing arm : 65 nm
guide bolt : 25-30 nm

If your brake wear warning light is illumninated, see replacement sensors.

MINI recommends the brake fluid be replaced every 2 years. See ATE Super Blue for replacement brake fluid. ATE Super Blue is a high quality performance fluid that will last much longer than the standard DOT4 fluid. This is an ABS friendly fluid.