If you're interested in KONI's ultimate shock absorber with a distinguished heritage in F1, CART, Grand-Am and many other race organizations, the KONI 28 Series is for you.

Fully independent compression and rebound adjustments with 8 repeatable settings for each allows you to dial in your suspension to suit different tracks. Race proven design delivers consistent performance under race conditions.

Features:

> Bump and rebound adjusters with 8 repeatable positions each
> Race proven seal and guide design
> Small size and low weight
> Quick release of upper spring seat
> Uses 2", 2 1/2," or 2 1/4" ID Spring
> Valved for higher spring rates
> Re-buildable with custom length and valving options
> No Warranty

Select Front or Rear Pair from the pull-down menu.

Fits all MINI models - specify when ordering:

2002-2006 R50 MINI Cooper Hatchback
2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertibles
2007+ R56 MINI Cooper and Cooper S Hatchbacks
2008+ R55 MINI Cooper and Cooper S CLUBMANs
2009+ R57 MINI Cooper and Cooper S Convertibles

Recommended for track/ limited street use.

NOTE: Front struts must be used with camber plates - will not work with stock upper strut mounts. The fronts are designed to work with 5/8" bearing camber plates, although other sizes can be used if specified when ordering. The rear shocks are designed around the factory mounts.

The sway bar bracket for the front strut is a screw-on piece and is included. The specific lower brackets for the brake lines are not included - we recommend a zip tie to hold these and any other lines as welding will distort the inside of the housing.

Built-to-order, these items require 4-6 weeks for delivery. 'Special Order Item' requires pre-payment at the time of order.

Click on 'Tech Information' below, or click here for more technical information.

For set-up suggestions, read this article.

Share