The principle of how foam air filters work is simple: "Open Cell" Polyurethane Foam is wetted with specially developed filter oil. The "sticky" filter oil is suspended in the path of the dirty air on the strands of the web-like cell structure of the foam. This makes it impossible for dirt to pass through the depth of the filter without sticking to the strands. As the outer strands become loaded with dirt particles, the wetted strands down stream start trapping dirt, allowing the entire thickness to be utilized. This prevents surface loading or air restriction for 80% of the service life of the air filter element. When the filter is sufficiently dirty, it can be easily washed, re-oiled, and re-used.

See G2NME1020 for Cooper filter.

See Filter Maintenance Kit to care for this filter.

To clean the filter:

A) Gently knock all the crud off the filter before you apply an air filter cleaning agent.

B) Spray generous amounts of Cleaner on the inside & outside of the filter. Let it soak approximately 3-4 minutes. Rinse out the filter element in warm water until clean. A second application may be necessary for heavily soiled elements. Next you must let the filter dry completely. Very important! Re-oil per instructions, and you are ready to go.

C) Spray the filter inside and out until the filter has complete coverage with oil. Next work the oil into the foam using your hands. Repeat this step once more, and then dab filter with paper towels to remove excess oil. If your filter has a rubber mount flange, be sure to clean the mounting surface free of oil.

For 2007-on MINI Cooper and Cooper S Coupe. Select model from pull-down menu.

Does NOT fit 2002-2006 Models.

Share