Silverguard Plus Material - TOUGH ON THE OUTSIDE, SOFT ON THE INSIDE
Silverguard+ is a 300 Denier polyester material with a reflective, water resistant coating on the outer layer and a soft, non-abrasive layer on the inside. It is a great choice for all-around car cover use, suggested for most conditions except extreme rain, snow or ice. 300 denier is a strong, heavy weave which will not rip or tear easily. The silver coating on Silverguard+ does an excellent job of reflecting sunlight, while keeping rain and animal droppings from damaging the vehicle finish. The special soft inner layer pampers the most delicate paint finish.

On a scale from 1 - 5
Water Resistance - 4
Breathability - 2
Softness - 5
Hazard Protection - 4
UV Protection - 4
Compactness - 3

Car cover maintenance tips:

It is important to keep your cover clean. A dirty cover will actually harm vehicle paint, and will transfer dirt and dust onto your vehicle after use. So take care of your cover. Here's how:
After use, your cover will inevitably become soiled from the elements it was designed to protect your vehicle from. When this happens, wash your cover in a large commercial washing machine. If the cover is excessively soiled, use a mild detergent. Do not dry your cover in a dryer! Hang it out to air-dry.

See G2NMA1210 for a list of all options.

Share