MiniMania.com
NEED HELP?

Currency: 

 Newsletter Sign Up


Products


Resources


News Highlights

NCA 2008 Gallery

NCA Gallery No. 1

NCA 2008 Report

Mini Mania Open House and Lawn Party
by Jerry (Siddhartha) Bradbury
What can transform a peaceful sylvan lawn in Gold Country into a carnival overnight? The annual Mini Mania Open House and Lawn Party of course! Those who were there got to see first hand all the eye candy, but for those who were not, the Mini's ranged from an electric Moke to a VTEC powered Classic, to Randy Steven's tricked out CVT to Robert Holt’s Purple Haze convertible to three full on Mini race cars: my sprint car, Jacques Andres' enduro car and Eric and Colin Herricks's rally car, and many in between.
Read more...

Race Report -USTCC

Infineon Raceway, April 11, 2008.
by Jerry (Siddhartha) Bradbury
My Mini has a new setup for this race. Speed parts from my sponsor Mini Mania have been added by my sponsor Bay Bridge Motors and USTCC sponsor Nitto has provided four brand new NT 01 tires. This will be my first official race with the US Touring Car Championship and I look forward to hitting the grid with more horsepower and quicker lap times.
Read more...

MINI Clubman Review

Published: 21st April 2008
The new MINI was launched in 2001, to much acclaim. Although bigger than the original Mini, what it lacked in rear legroom, it made up for in unusual styling and a vast array of personalisation elements, much loved by a local estate agent.

The MINI Clubman has the same raft of options but its main benefit is the extra length, which should make rear passengers happier.
Read more...
Found: 1 Items
My Wish List My Wish List  View Shopping Cart View Cart
NME5041
Click Image for Larger View


Click Image for Larger View


Click Image for Larger View
SELF-ALIGNING 15% SUPERCHARGER PULLEY W/BELT- MINI COOPER S
 
Get more POWER from your Supercharged MINI Cooper 'S' with the effective, economical and lightweight ULTRIK 3-piece self-aligning supercharger pulley upgrade system with belt.

A 15% reduction in the supercharger pulley diameter of the MINI Cooper S increases the boost of your MINI Cooper S by more than 4 pounds, resulting in a dyno-measured gain of over 20 horsepower AT THE WHEELS. Maximum boost is achieved at lower RPM, giving more power in the mid-range of your MINI Cooper S.

Fits 2002-2006 R53 MINI Cooper S and 2005-2008 R52 MINI Cooper S Convertibles.

Does NOT fit 2007+ R56 MINI Cooper and S, and does NOT fit the R55 MINI CLUBMANS.

- Unique 3-piece supercharger pulley self-aligning design delivers superior clamping force, and doesn't pull back from the stop when tightened like 2-piece designs.

- The new built in stop locates the supercharger pulley in the proper position, simplifying installation.

- Optimum 15% reduction avoids over-spinning supercharger and excessive intake charge heat generated by smaller supercahrger pulley upgrades.

- Includes correct length belt for proper tensioner operation.

- Lightweight design with low rotational mass spins up faster than heavier steel supercharger pulleys.

How Small is Too Small?
Supercahrger pulleys reduced 16%, 17% or 19%, or using an oversized crank pulley, may spin the supercharger faster than our 15% pulley, but most of the additional boost cannot be used and can contrubute to engine and exhaust system damage. These smaller pulleys cause the supercharger to operate at higher RPM than it is designed to tolerate. Plus, the Roots type supercharger drastically looses efficiency at higher RPMs, generating excess heat as it tries to compress more air. In the process, it further overloads the barely adequate air-to-air intercoolers and causes the ECU to enrichen the mixture and pull back on ignition timing to preserve the engine. This results in lost power, poor fuel economy, lower reliability, the potential to 'meltdown' the catalytic converter and higher emissions.

At 15%, the ULTRIK supercharger pulley provides the most boost increase available without over-revving the supercharger at high engine RPMs. This ratio gives you added power without undue stress on the OEM supercharger or other adverse effects. Remember, if you're looking for performance increase AND reliability backed by the best Warranty in the industry, the ULTRIK 3-piece pulley upgrade system is the right choice for you and your MINI Cooper S!

And Lighter is Even Better
Compare our supercharger pulley's 7.8oz. low rotational mass design to competing all steel designs, weighing as much as 15.6oz. The ULTRIK 3-piece supercharger pulley system concentrates the weight near the treated steel center, incorporating lighter weight aluminum alloy material at the circumference, accomplishing an inertial mass 4 times lower than the 15.6oz pulleys. Ask others how much their supercharger pulley weighs. It spins very fast, so don't accept that additional mass is insignificant. Use our lightweight pulley along with our lightened crank pulley (NME5030) to really reduce rotational mass and improve acceleration.

All steel clamp design has similar thermal expansion rate as the supercharger shaft to maintain superior clamping force over entire operating temperature range.

Installation Notes
The ULTRIK three-piece unit allows easy installation of the supercharger pulley onto the shaft without a press and enables easy removal. "Three pieces for a reason", our hydraulic press tests show the ULTRIK 3-piece pulley design superior to other tested 2 and 3 piece brand name designs. We won't mention names here, but we've tested all but the cheap knock-offs.

Locating the pulley on the shaft is easy and reliable, simply run it all the way onto the shaft until it stops. Proceed with tightening the bolts in sequence and the unique 3 piece design clamps down relentlessly on the supercharger shaft, without pulling against the stop.

The NME5041 kit, which includes the correct length belt to keep the tensioner centered in its range, is best for performance and reliability. See NMK5041 for a kit that includes this pulley and the rental tool.

The kit includes high quality 3-piece self-aligning supercharger pulley (2.19" diameter) and belt. See also NME5018 for Pulley Removal Tool, and NME5990 for Belt Tensioner Tool. Just installing one pulley? You can rent a puller for just $1 ($100 refundable deposit applies). See NME5016.

We recommend the belt be inspected regularly, and replaced once a year.

Click Here for Installation Instructions On-Line

$139.95
 
 

 
Part No:  

Car(s):
NEW_MINI


SELF-ALIGNING 15% SUPERCHARGER PULLEY W/BELT- MINI COOPER S
One or more Information, Installation or Applicaition Article is available for this item.


   Also Purchased   Tech Information   May we Suggest   Shipping Info   Warranty   Price Guarantee   Reviews  [0] 
 
Maximize Specials
Mini Cooper Part-NMG7615 MINI COOPER CLUTCH MASTER CYLINDER OEM - COOPER AND S Factory replacement clutch master cylinder. The plastic body of this unit makes this master cylinder rather delicate and can lead to failure when clutch components fail. For your 2002-2006 R50 [ More Info]

On CLEARANCE: $59.65
List Price: $99.95
 
 
Mini Cooper Part-NME2032 MINI COOPER S COLD AIR INTAKE SYSTEM The ULTRIK cloth filter equipped Cold Air Intake System results in cooler and more efficient air delivery to the supercharger. This Cold Air Intake System uses a high flow reusable cloth fi [ More Info]

On SALE: $99.95
List Price: $149.95
 
 
Mini Cooper Part-SHIRT70 NEW MINI DEFINITION T-SHIRT 100% White Cotton T-Shirt with the 'MINI DEFINITION' on the back and a smaller Lightining Blue Cooper S on the front. MINI COOPER: (noun) a compact remake of the classic vehicle with go-kart l [ More Info]

On SALE: $13.95
List Price: $17.95

Size options available
 
 
Mini Cooper Part-NMI4420-03 iPod DOCK INSERT SLEEVE - 3G: 30/40GB iPOD LIMITED TO STOCK ON HAND. This is the optional Nano Size sleeve for the NMI4410 iRide and NMI4420 iDock iPod docks.

On CLEARANCE: $11.13
List Price: $17.95
 
 
 
copyright © 2008 MiniMania.com