Fits 2002-2006 R53 MINI Cooper S Hardtop and the 2005-2008 R52 MINI Cooper S Convertible.

Wiring harness with all connectors for easier installation is included. Powder-coated faceplate mounts under the toggle row with 2 illuminated independent circuitry switches. Improves any driving condition you may encounter as well as creating an absolutely dynamic visual enhancement to your MINI COOPER S.

Each bar mounts directly to existing bolts on your frame, and no drilling steel to level the bar is required. No exposed tabs to come loose. The bar is perfectly positioned and perfectly level once mounted to your existing frame bolts.

The system is ignition activated, preventing accidental illumination when the mini is turned off. You can run each set of two lamps independently due to our wiring harness. Run your two most outer lamps, or your inside two lamps, or all four at the same time. Our wiring harness is completely moisture resistant and fully bound. All end connectors are already attached, all fuses and relays are already in place.

A texturized powder coated faceplate is located under your toggle row, out of the way, but easily accesible. Two switches are of course also included, and illuminate if the lamps are activated.

Will fit the factory Aero kit with a slightly different installation process. If your MINI has the factory Aero Kit installed, please specify Aero kit when ordering. The only difference in the installation procedure is you mount the bar on the car with the areo kit installed, and then work through the grill opening.

Lights not included - wiring harness includes connectors for Hella brand lights, Hella 500 shown in photos (not included). Other lights can be used but may require changes to the connectors.

See NMA3027 for Hella 500 driving lights.