5% Off
Shop by Car
Mini Cooper Rear Control Arm Adjustable (4) R50-r61

Mini Cooper Rear Control Arm Adjustable (4) R50-r61

Mini Cooper Rear Control Arm Adjustable (4) R50-r61
Part No: NMS5010
SALE Price $395.95
Was: $695.00
You save: $299.05
Alternate Products
Mini Cooper Rear Control Arm Adjustable R50-r61
$199.95 Mini Cooper Rear Control Arm Adjustable R50-r61

Adjustable rear control arm upper and lower set (4 adjustable arms) for the MINI Cooper and Mini Cooper 'S' results in improved handling and quicker turn-in response. These solid Heim joint control arms are a must-have for serious performance driving for track days and autocross competition. The solid Heim joints eliminate any play induced by the stock rubber or poly bushings - this means precise suspension geometry is maintained during transisions for maximum control!

Recommended for track use but can be used for street driving - see NOTE below. 

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

2007-2013 R56 MINI Cooper and S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman 
2013-2016 R61 MINI Cooper and Cooper S Paceman

This Rear Control Arm Set consists of four (4) weld-free adjustable control arms, pre-assembled with high quality oversize heim joints and threaded for quick and accurate full adjustment of rear toe and camber. Weldless construction includes flat wrench notch for easy adjustability.

Our four adjustable arms achieve precise and independent adjustment of toe-in and camber - unachievable with two arm kits. Think of a 'triangle' - with the 4 arm kits, you change two legs of the triangle, with the 2 arm kits, you only change one leg of the triangle. This means both camber and toe-in are affected simultaneously with the 2 arm kits - not the best solution!

'Toe-in' means the front edges of the two rear or front tires are angled inward toward each other, with 'toe out' being the inverse. While severe amounts of incorrect toe and/or camber will result in unwanted tire wear, a small amount of toe change in the rear can make the car turn-in more predicatable. 'Camber' is the amount of tilt the tire has top to bottom. Negative camber, with the tire tops angled inward relative to the bottom, will increase the cornering ability.


The lack of rubber bushing makes these control arms very precise. However, the solid Heim Joint (Pillow Ball Rod End) may generate some knocking noises as the arm rotates when going over bumps on the street. This is 'normal' for this product.

On MINIs with the optional Xenon Headlights - there is a 'level sensor' used by the Xenon Headlights that attaches to the Drivers side Upper Rear Control Arm - these Adjustable Control Arms do not have accommodations for attaching this sensor. Most customers simply us a couple of standard 'hose clamps' to affix the sensor to this arm.

Related Technical Articles:
Mini Cooper Adjustable Rear Control Arms Application Guide
Created: March 09, 2016
Mini Cooper Rear Adjustable Control Arms - when you need them, what to look for, and what is available. See why you need rear adjustable
Created: December 12, 2013
Check out our suspension parts today.
Customer Reviews
Recently Viewed Items