Mini Mania
Est. 1974
Shop by Car
 Live Help
800-946-2642
Search
All
Your Price $92.95
Qty:
Oil Filter/ Drain Plug 6-pk Oem - R50/52/53 Cooper & S

Oil Filter/ Drain Plug 6-pk Oem - R50/52/53 Cooper & S

Oil Filter/ Drain Plug 6-pk Oem - R50/52/53 Cooper & S
If you regularly change the oil in your MINI, here is a money saving package with 6 factory original oil filters, 6 O-rings, and 6 drain plugs with washer.

For 2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback or 2005-2008 R52 MINI Cooper and S Convertibles

NOTE: The hole at the bottom of the oil filter will appear much smaller than the shaft in the filter base - this is NORMAL and CORRECT. If you press the filter into the base, the hole will 'stretch' over the shaft. This is a design feature to ensure a tight seal so the oil does not bypass the filter.

To order a single filter, see NMK1078.

To reset the oil change interval in your MINI, see oil service reset.

Related Technical Articles:
Created: November 05, 2013
OEM is an acronym “Original Equipment Manufacturer” “OEM”and Aftermarket Parts should not be confused. Most car manufacturers find it impossible to actually manufacture all the various parts in their cars and thus use independent outside manufacturers.
Mini Cooper Oil Change Tip & Hints - R50/52/53 Cooper & S
Created: October 11, 2011
Frequently, the canister cover will be very difficult to break free.  Use a breaker bar with CAUTION!  You may need a low profile' socket due to the limited space available. If you loosen the filter canister cover enough to break the seal, it will help drain the oil from the filter as you drain the oil pan.  Less mess later! When replacing the O-ring, save the old one just in case (will explain later). When replacing the O-ring on the canister cover, make sure you lubricate the O-ring with PLENTY of fresh oil before you install it, and lubricate again after it is in place.  If you fail to do this, the O-ring will bunch up and cause a leak! The new oil filter should be 'pre-seated' into the base and cover before installation.  Take the filter (plastic side down) and press firmly into the base until it is fully seated.  Remove and do the same into the cannister cover.  This reduces the resistance from initial seating.  You can leave the filter seated into the cover and screw the cover back onto the base, or you can leave the filter in the base fully seated and screw the cover back onto the base.
Created: July 28, 2010
The early MINI with production dates up to 07/2004 has a couple extra pieces inside the oil filter cannister cover - a spring and plastic cage. These items were eliminated on the later models after 07/2004. This article explains the differences and what to do if you lose some of these parts.
 Keep Your Engine Properly Tuned for Better Fuel Economy
Created: December 28, 2007
Fixing a serious maintenance problem, such as a faulty oxygen sensor, can improve your mileage by as much as 40 percent.
How to improve fuel economy in your MINI
Created: July 03, 2007
Fuel economy in your MINI is affected by several factors, all of which are under your control. Here are some tips for improving your MINI's gas mileage.
Created: January 02, 2007
Resetting Oil Service Light on your 2002 - 2006 Cooper and Cooper S Hatchbacks, and 2005 - 2008 Cooper and Cooper S Convertibles
Customer Reviews
Write a customer review
Review this item and receive a $5 coupon off you're next purchase!* Click Here For Details

Recently Viewed Items