× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

MINI factory OEM replacement oil filter base & cover (w/filter). Includes the entire housing with filter and sensor. Also includes gaskets (and O-rings) for the housing cover, oil cooler,  and between the base and block.

Fits the following Cooper S models:

2002-2006 R53 MINI Cooper S Hardtop with manual transmission
2005-2008 R52 MINI Cooper S Convertible with manual transmission

Includes the base, cover, filter, gasket, oil pressure switch and the oil cooler module.

NOTES:

  • The hole at the bottom of the oil filter will appear much smaller than the shaft in the filter base - this is NORMAL and CORRECT. If you press the filter into the base, the hole will 'stretch' over the shaft. This is a design feature to ensure a tight seal so the oil does not bypass the filter. 
  • The version for the automatic transmission has been discontinued and is no longer available.

 

MINI Factory OEM replacement oil filter housing (with base cover & filter) for manual transmission. For the 1st generation MINI Cooper S models including 2002-2006 R53 Hardtop and 2005-2008 R52 Convertible.
Genuine OEM Part OEM Oil Filter Housing Manual Transmission MINI Cooper S R52 R53 Gen1

OEM Oil Filter Housing Manual Transmission MINI Cooper S R52 R53 Gen1

OEM Oil Filter Housing Manual Transmission MINI Cooper S R52 R53 Gen1

OEM Oil Filter Housing Manual Transmission MINI Cooper S R52 R53 Gen1

OEM Oil Filter Housing Manual Transmission MINI Cooper S R52 R53 Gen1
Selected: Cooper S w/Manual Trans
Part No: NME8616
This item is currently not available.
Expected back in stock after Aug-01-2024
Fits the following:
MINI (2002-Current)
Select variations below for more info:
Factory replacement oil filter base & cover (w/filter). This unit is the newer design WITHOUT the troublesome cage & spring.

Fits the following models:

2002-2006 R50 MINI Cooper Hatchback (all transmssions)
2002-2006 R53 MINI Cooper S Hatchback WITH Automtic transmission

2005-2008 R52 MINI Cooper Convertible (all transmssions)
2005-2008 R52 MINI Cooper S Convertibles WITH Automtic transmission

All Cooper models, or Cooper S models with Automatic Transmission.

The MINI factory has discontinued the fully assembled housing, so we are supplying all of the individual pieces to make up the same identical housing at the same price - all MINI factory original parts.  Includes the base, cover, o-ring, filter, gasket and oil pressure switch.

Install the filter with the black plastic ring 'down' into the housing.  Torque the cover to oil filter housing to 25Nm or 18 ft-lb.

Install the Oil Pressure Warning Switch into the housing at 20Nm or 15 ft-lb. (The factory uses a sealant on the threads).

For the 3 bolts that attach the Housing to the Block, use the following Torque:
30 Nm (22 lb-ft) on the W10 engine (Cooper non-S)
25 Nm (18 lb-ft) on the W11 engine (Cooper S)

NOTE: The hole at the bottom of the oil filter will appear much smaller than the shaft in the filter base - this is NORMAL and CORRECT. If you press the filter into the base, the hole will 'stretch' over the shaft. This is a design feature to ensure a tight seal so the oil does not bypass the filter.


 

MINI Factory OEM replacement oil filter base & cover (w/filter). This unit is the newer design WITHOUT the troublesome cage & spring. Includes the entire housing with filter and sensor. Also includes gaskets for the housing cover and between the base and block.

Fits the following models:

2002-2006 R50 MINI Cooper non-S Hardtop (all transmissions)
2002-2006 R53 MINI Cooper S Hardtop with Automatic transmission

2005-2008 R52 MINI Cooper non-S Convertible (all transmissions)
2005-2008 R52 MINI Cooper S Convertibles with Automatic transmission

All Cooper models, or Cooper S models with Automatic Transmission.

If you have an early MINI built before 07/2004, take a look at this article regarding the different oil cannister cover design.

For the 3 bolts that attach the Housing to the Block, use the following Torque:
30 Nm (22 lb-ft) on the W10 engine (Cooper non-S)
25 Nm (18 lb-ft) on the W11 engine (Cooper S)

NOTE: The hole at the bottom of the oil filter will appear much smaller than the shaft in the filter base - this is NORMAL and CORRECT. If you press the filter into the base, the hole will 'stretch' over the shaft. This is a design feature to ensure a tight seal so the oil does not bypass the filter. 

 

MINI factory OEM replacement oil filter base & cover (w/filter). Includes the entire housing with filter and sensor. Also includes gaskets (and O-rings) for the housing cover, oil cooler,  and between the base and block.

Fits the following Cooper S models:

2002-2006 R53 MINI Cooper S Hardtop with manual transmission
2005-2008 R52 MINI Cooper S Convertible with manual transmission

Includes the base, cover, filter, gasket, oil pressure switch and the oil cooler module.

NOTES:

  • The hole at the bottom of the oil filter will appear much smaller than the shaft in the filter base - this is NORMAL and CORRECT. If you press the filter into the base, the hole will 'stretch' over the shaft. This is a design feature to ensure a tight seal so the oil does not bypass the filter. 
  • The version for the automatic transmission has been discontinued and is no longer available.

 

 
 
Question:
I have a 2008 R52 Mini Cooper convertible. I have not had any luck with my mechanic ordering the correct oil filter housing unit. I have had to pay for 3 all of which being the wrong one. Aside from getting different mechanic how can I order the correct one myself. Can I use a picture of the broken one?
Answer:
After checking with our contacts at MINI, we confirmed that our NME8755 is the correct replacement oil filter housing for your MINI. 
I see that this item was superceded from another part number at one time - which means this may be a newer version and may not be identical to the one you are trying to replace. However is it the correct replacement based on the vin number you provided.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Cooper Oil Filter Housing Problems R50 R52 R53 Gen1
Created: July 28, 2010
The early MINI with production dates up to 07/2004 has a couple extra pieces inside the oil filter cannister cover - a spring and plastic cage. These items were eliminated on the later models after 07/2004. This article explains the differences and what to do if you lose some of these parts.