Roll Bar with addition of a bolt-in, removable diagonal brace/harness bar allowing easier access to rear seat for street driven cars. Includes hardware needed for installation.
Fits listed models:
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2007-2013 R56 MINI Cooper and Cooper S Hatchbaack
See NMC1003 for weld-in brace option.
SPECIAL ORDER ITEM - CUSTOM MADE APPROX 5 WEEK PRODUCTION TIME - Call to verify.
NMC2002 FOR CARS WITHOUT SUNROOF.
NMC1006 CARS WITH SUNROOF.
Specify Year, Model, and sunroof/no sunroof when ordering.
The rear seats can remain intact with the NMC1002 / 1006 which has the bolt-in diagonal and harness brace. The rear seats are still usable, but probably only for 'small people' or kids. The vertical support will reduce the ingress egress space, but not by much.
You will need to remove the passenger seat to get the roll bar into position.
Modifications: The mounting plate needs to mount on bare metal, so you will need to cut the carpet and padding beneath on the floor just in front of the rear seats. The rear brace mounts on the side panel just above the rear wheels - you will need to remove the side panels to mount and then cut a relief in them to clear the bar.
Each roll bar is made to order and will take 4 - 5 weeks.
Made with 1.75 DOM seamless tubing and is legal for SCCA and NASA.