Fits the following models:
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and S Convertibles
2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
This kit requires the use of the matching Wilwood Rear Brake Lines and Parking Brake Cable Kit. Select color and rotor type, and matching brake lines (required) and Parking Cable Kit (required).
For the Front Big Brake Kit, see NMB2041-P.
Combination hydra-mechanical parking brake caliper.
Smart Pad BP-10 Pads - Offers medium friction compound with the low noise and low dust of a street performance compound and the increased friction characteristics of a semi-metallic race compound. Smooth engagement with consistent response from a flat torque curve throughout its entire effective temperature range with good low to middle temperature wear rates. Beds quickly and provides fast response without excessive abrasion on vented iron rotors.
GT Series Rotor Mounting Hats - Lightweight and strong, these hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. Black anodized finish prevents corrosion and enhances appearance.
SRP Series 11.75" x .810" Straight Vane Vented Rotors - Adds stopping power and cooling capacity over smaller diameter OE rotors. Premium grade, long grain carbon iron provides long wear with high thermal stability and resistance to distortion. Venting and cleaning action of the holes and slots reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on rotor faces. This results in smoother engagement with improved consistency and response at the pedal. Treated with silver zinc wash, these rotors resist corrosion.
Caliper Brackets and Hardware - Aluminum mount brackets with steel threaded bolt inserts are lightweight and stong. Each bracket is CNC machined for precise fit. Grade 8 or higher and AN style nuts, bolts studs, washers, and alignment shims are included in all applicable kits.
Note: Installation of Wilwood Disc Brakes may affect the wheel offset.
Matching Brake Lines (NMB2057) must be ordered separately.
Brake fluid should be replaced every 2 years. See ATE Performance Brake Fluid for replacement brake fluid. ATE® Type 200 Amber is a high quality performance fluid that will last much longer than the standard DOT4 fluid. This is an ABS friendly fluid.
ATE® TYPE 200 Amber has a dry boiling point of 536F and a wet boiling point of 396F which far exceeds standard brake fluids meeting the DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. 100% synthetic fluid is specifically designed to resist the high temperatures of racing brakes and yet very suitable for daily driving.
ATE® Super Blue has a dry boiling point of 536F and a wet boiling point of 396F which far exceeds standard brake fluids meeting the DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. 100% synthetic fluid is specifically designed to resist the high temperatures of racing brakes and yet very suitable for daily driving.