The DS3000 racing pads provide outstanding braking performance under all conditions. Unlike many materials, the performance characteristics of DS3000 provide predictable braking and pedal feel. From low speeds to high speeds, from cold start to a scorching 750degC, DS3000 maintains a constant high coefficient which guarantees exceptional fade resistance and consistent bite.
The main characteristics are:
+ Reduced bedding-in time (approx. 50% quicker than other materials).
+ Extremely high friction level (0,62 coefficient of friction) at any termperature or speed.
+ Higher intial bite.
+ Predictability, in all conditions, when braking into the corner because of the flat friction curve.
+ Less off-brake between the brake pedal and throttle.
WARNING: DS3000 is not suitable for road use.
If your brake wear warning light is illumninated, see replacement sensors.
Brake fluid should be replaced every 2 years. See ATE Performance Brake Fluid for replacement brake fluid. ATE Type 200 Amber is a high quality performance fluid that will last much longer than the standard DOT4 fluid. This is an ABS friendly fluid.
ATE® Type 200 Amber Fluid has a dry boiling point of 536F and a wet boiling point of 396F which far exceeds standard brake fluids meeting the DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. 100% synthetic fluid is specifically designed to resist the high temperatures of racing brakes and yet very suitable for daily driving.