The NM Engineering Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing this adapter is an easy, reliable, and most accurate way to tap into the 2.0T and 1.5T engine (S and non-S) boost source for installing your boost gauge or aftermarket diverter valve.
Fits the following models:
2014-2020 F56 MINI Cooper and Cooper S Hardtop
2015-2020 F55 MINI Cooper and Cooper S Hardtop 4-Door
Here is the reason why this is the 'correct' Boost Adapter: OBDII gauge systems such as ScanGauge, P3, and PLX devices allow you to display sensor readings that the ECU receives, including boost. Generally, such readings are slightly off in timing and accuracy; even furthermore if you have a piggy-back power module system such as Burger Tuning's JB+. This type of upgrade alters the signal that the MAP (Manifold Absolute Pressure) sensor produces to induce ECU adaptation for more power increase. This system works but at the same time it skews the OBDII boost display.
[ ] 6061 Billet Aluminum
[ ] Black Hard Anodized
[ ] Brass Fitting
[ ] Mounting screw with matching OEM thread pitch - others will strip the plastic thread
Notes: Just like the R5(X) N18 engines, the B38/46/48 also do not produce vacuum reading at manifold.