Introducing the newly redesigned NM Engineering Control Arm kit. While others use 1" diameter 6061 aluminum material, NM machines our control arms utilizing aerospace grade 7075-T6 1 1/4" hex aluminum bars. The use of larger material provides rigidity and strength of steel bar but without the weight and lack of oxidation resistance.
Fits the following models:
2002-2006 R50 Cooper and R53 Cooper S Hardtop
2005-2008 R52 Cooper and Cooper S Convertibles
2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman
NM Control Arm Kit also features precision heavy duty rod ends made from heat treated hardened steel with self lubricating nylon race. The threaded rod ends allow user to dial the suspension camber to desired specs, crucial for the weekend track enthusiasts and professional racers. T-303 stainless steel is used for the spacers to avoid any flexing and crushing caused by suspension load.
The optional (available separately) rubber boot protects rod end against dirt and grime that may cause performance noise.
Select the Control Arms or Control Arms WITH the Rod End Boot Kit.
Kit comes with two (pair) complete bars with hardwares, set at factory arm length. Buy two kits for complete top and bottom arms replacement.
Vehicle with HID (Xenon) headlights can only install/replace lower control arms.
Heim Joint (Pillow Ball Rod End) may generate some noise for its lack of rubber bushing while still performing normally.
Finish: Powder Coat Smoke Clear.
On MINIs with the optional Xenon Headlights - there is a 'level sensor' used by the Xenon Headlights that attaches to the Drivers side Upper Rear Control Arm - these Adjustable Control Arms do not have accommodations for attaching this sensor. Most customers simply us a couple of standard 'hose clamps' to affix the sensor to this arm.