× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
NM’s Premium Upper Tie-Bar in BLACK is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling. Black finish.

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster

Attention to detail and performance are NM’s forte and this part does not disappoint. The 6061-T6 aluminum mounting pads will eliminate strut tower “mushrooming” be reinforcing the upper mount and is attached to mounts studs with shouldered long-reach nuts to make sure that the bar and front suspension is secured by more than just a few threads. In addition, when you look at the underside of the pads, you will notice two machined pockets that accommodate the upper strut bearing locator pin on either side while concealing it from view.

Finally, the simplest, yet most overlooked feature may be the twin mounting bolts on each side that attach the bar to the mounting pads. Most others use a single bolt to secure each side of the bar to the mounting pads. The problem with that, is no matter how tight you cinch that bolt, the bar can still pivot at that point rendering them ineffective against chassis flex.

NM Billet Tie-Bar clears factory airbox as well as NM's Hi-Flow Induction Kit.

Black finish.

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER

FRONT STRUT BRACE W/REINFORCEMENT PLATES NM BLACK - R55/56/57/58/59 MINI COOPER
Selected: Black
Part No: G2NMS2103
$461.93
Qty:
Fits the following:
MINI (2002-Current)
Select variations below for more info:
NM’s Premium Upper Tie-Bar in BLUE is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling. Blue finish.

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster

Attention to detail and performance are NM’s forte and this part does not disappoint. The 6061-T6 aluminum mounting pads will eliminate strut tower “mushrooming” be reinforcing the upper mount and is attached to mounts studs with shouldered long-reach nuts to make sure that the bar and front suspension is secured by more than just a few threads. In addition, when you look at the underside of the pads, you will notice two machined pockets that accommodate the upper strut bearing locator pin on either side while concealing it from view.

Finally, the simplest, yet most overlooked feature may be the twin mounting bolts on each side that attach the bar to the mounting pads. Most others use a single bolt to secure each side of the bar to the mounting pads. The problem with that, is no matter how tight you cinch that bolt, the bar can still pivot at that point rendering them ineffective against chassis flex.

NM Billet Tie-Bar clears factory airbox as well as NM's Hi-Flow Induction Kit.

Blue finish.

NM’s Premium Upper Tie-Bar in BLACK is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling. Black finish.

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster

Attention to detail and performance are NM’s forte and this part does not disappoint. The 6061-T6 aluminum mounting pads will eliminate strut tower “mushrooming” be reinforcing the upper mount and is attached to mounts studs with shouldered long-reach nuts to make sure that the bar and front suspension is secured by more than just a few threads. In addition, when you look at the underside of the pads, you will notice two machined pockets that accommodate the upper strut bearing locator pin on either side while concealing it from view.

Finally, the simplest, yet most overlooked feature may be the twin mounting bolts on each side that attach the bar to the mounting pads. Most others use a single bolt to secure each side of the bar to the mounting pads. The problem with that, is no matter how tight you cinch that bolt, the bar can still pivot at that point rendering them ineffective against chassis flex.

NM Billet Tie-Bar clears factory airbox as well as NM's Hi-Flow Induction Kit.

Black finish.

 
 
Question:
Is the sway bar listed only for the front of the car or can it also be used for the back of the car?
Answer:
The sway bars are very different for front vs rear. They are not interchangeable.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
NM MINI Tuning Products
Created: December 12, 2013
NM Engineering NM MINI Tuning products help improve your motoring experience while keeping the essence of what makes a MINI a MINI.