800-946-2642
Shop by Car
Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59

Mini Cooper Brakes Stage 3 Stoptech Ebc Pads R55 R56 R57 R58 R59
Description
Upgrade your MINI's brakes with Stoptech's performance slotted rotors and the EBC Redstuff performance ceramic brake pads front & rear. Kits available with and without Stainless Steel Brake lines for improved pedal feel.

Fits the following models:

2007-2013 R56 MINI Cooper S Hatchback
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster

Kits available:

  • With EBC Redstuff Ceramic pads or EBC Yellowstuff Street / track pads
  • With or without Stainless Steel Brake Lines
  • Select accordingly.

Stoptech's SportStop one-piece direct replacement rotors fit stock calipers. Slotting helps wipe away the debris that forms between the pad and the disc, and adds more bite. The rotor finish helps prevent glazing of the pads and improves wet and dry braking performance. Durable black e-coating on the non-swept areas of the rotor to prevent unsightly corrosion. Quality is assured as the rotors are manufactured to meet or exceed all OE specifications.

  • Direct replacement, stock-sized rotors that fit stock calipers
  • 294 mm x 22 mm fronts
  • 259 mm x 10 mm rears
  • Increased initial bite response
  • Improved wet weather response
  • Reduced brake pad glazing
  • OE vane designs, including casting part line location
  • Machining designs engineered for optimal rotor integrity
  • Double-disc ground for a consistent friction surface and better pad bed-in
  • Mill-balanced for vibration-free performance
  • Black e-coating on non-friction surfaces provides lasting, attractive looks
  • Enhances open wheel appearance

EBC Redstuff Ceramic - 3000 Series Performance Brake Pads - For Highly Tuned Cars and Fast Street. This material is an Aramid fibre based brake compound enhanced with ceramic particles. Updated from the previous generation pre-ceramic compound, this material is light years ahead. It lasts longer, it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads.

  • High Initial Brake Effect
  • Strong Resistance To Fade Under Load
  • Reduced Rotor Wear
  • Low Dusting Of Wheels
  • Shimmed; Chamfered; And Slotted
  • Features EBC Brake-In Coating For Fast Break In
  • Zero Noise And Extended Lifetime
  • Accepts factory brake wear sensor

EBC Yellowstuff Street / Track Brake Pads - Although a full race material and capable of high temperature use with very good wear life, this new formulation sets a new trend in race type brake pad compounds that can be used on the highway. The “bite” from cold is superb which is uncommon with race materials (normally requiring warm-up) and makes this a pad which can be safely used on both street and track.

This new formulation has been used by numerous championship race and rally drivers and is truly a milestone in brake pad material development. Nominal friction coefficient 0.5 with zero rotor damage and similar dust to original pads.

  • Grip Positively From Cold To Blistering Temperatures
  • Pre-Selected For Race Use Or Truck/SUV Street Use
  • Strong Resistance To Fade Under Load
  • Totally Resistant To Rotor Vibration
  • Shimmed; Chamfered; And Slotted
  • Features EBC Brake-In Coating For Fast Break In
  • Accepts factory brake wear sensor

 

StopTech Stainless Steel Brake Lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation.

StopTech brake lines consist of a Teflon® inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. StopTech brake lines feature a Clear Abrasion Resistant Cover for maximum protection against chaffing

All StopTech Stainless Steel Brake Lines are DOT (United States Department of Transportation) compliant and 100% tested to a pressure of 4500 psi.

NOTE:
Brakes are a safety critical part of your vehicle and should be installed by a competent mechanic following vehicle manufacturers installation procedure. The surface of these brake pads is coated with a red coating known as BRAKE-IN. This coating helps your newly installed brake pads to 'seat' or bed-in quickly. However, pads should be used gently for the first 100 miles until optimum braking is observed. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor).

Follow manufacturers instructions for 'bedding in' new pads.

If your Brake Wear Warning light is illuminated, you need to replace the Brake Wear Sensor OEM.

If you need to replace the set screw that holds the rotor in place, see NMB7603.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Customer Reviews
Recently Viewed Items