G2NMI6010 for the Standard rear seat delete.
If you have racing harnesses such as the Schroth harness, you will need the kit with grommets (G2NMI6011) to provide access to the seatbelts.
Select from the Image List below or to the right.
The seat delete is secured using stock mounting points. On the Schroth Harness, the outer belt needs to be mounted to the floor with the stock seat belt mounting bolt. The harness that plugs into the center buckles can be plugged in and removed with the seat delete in place. When you are done racing, you can simply unplug the center buckles and store your harness under the seat delete.
Manufacturers warranty applies. $30 shipping within Continental US. Additional shipping charges applies for AK, HI, and international orders.
FITS: 2007+ R56 Mini Cooper and Cooper S - Hardtops only. Does not fit the Convertible.
NOTE: NOT compatible with the new 3rd generation 2014 F56 MINI Hatchback.
SPECIAL TOOLS: T40 Torx bit required for removal of factory bolts. Can be found for less than $10 at a tool store.