5% Off with Coupon Code

Shop by Car
Mini Cooper S Intake Hi-flow Induction Gen2 R55-r61 2011-03/2012

Mini Cooper S Intake Hi-flow Induction Gen2 R55-r61 2011-03/2012

Mini Cooper S Intake Hi-flow Induction Gen2 R55-r61 2011-03/2012

Mini Cooper S Intake Hi-flow Induction Gen2 R55-r61 2011-03/2012

Mini Cooper S Intake Hi-flow Induction Gen2 R55-r61 2011-03/2012
Part No: G2NME2116-P
Internet Price $0.00
This is a Special Priced Item
Select a Item below for more information:
Hi-Flow intake system for the Turbocharged Cooper S models with the N18 engine. Unlike some competitors, this Premium intake features an integrated larger turbo inlet tube. CNC mandrel bent aluminum pipe, stainless brackets and silicone couplings that are all designed, engineered and manufactured to fit and perform.

This MINI Induction Kit is CARB APPROVED! Product includes CARB exemption decal necessary to pass the visual inspection portion of the California Emissions test.

Fits the following Cooper S models with the N18 Engine:

2011-03/2012 R56 MINI Cooper S Hardtop
2011-03/2012 R55 MINI Cooper S Clubman
2011-03/2012 R57 MINI Cooper S Convertibles
2011-03/2012 R60 MINI Cooper S Countryman
2011-03/2012 R58 MINI Cooper S Coupe
2011-03/2012 R59 MINI Cooper S Roadster

Available with Blue, Black, or Carbon Fiber intake Snorkel, for US Models with Mass Air Flow sensor (MAF) and for non-US Models without the MAF. Select appropriate version.

The 'Open-Air-Box' system gives you the abundance and unrestricted 360° of air source compared to OEM's sealed air box with flat filter and tube fed air source. During R&D, we installed temperature probes around the engine compartment and the gauge showed the inside temperature matched the ambient after vehicle speed past 20 mph. And by logging the Mass Air Flow (MAF) sensor also showed that open-air-box intake generated higher volume (gr/sec) of air going through the sensor. So when we had to choose between (a) cooler air at all speed with limited air source, vs. (b) cooler air at 20~ mph. with unlimited air source, the choice was pretty obvious.

For 2011 and newer models, see G2NME2112.

Note: The height of this induction kit is the same height as the stock Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

See G2NME2125 for the Filter Maintenance kit.

See G2NME2121 for the Replacement Filter Element.

For 2007-2010 Cooper S US models, see .

For 2007-2010 Cooper S NON-US models, see .

For 2011- Cooper S NON-US models, see .

For 04/2012+ Cooper S US models, see .


Recommended Additional Products
Related Technical Articles:
June Performance Upgrade Event - Save Now on Performance Parts
Created: May 27, 2016
Get the Performance Your MINI Cooper Deserves during Mini Mania's June's Performance Promotion. Our June event provides deep discounts on a wide variety of Performance Parts - from Intercoolers to Brakes, Struts, Shocks and more. Get into the June Savings! Get into Performance!
Intercooler Performance Upgrade Kits for Your MINI
Created: June 01, 2016
The best in Intercooler Performance Upgrades begins with the best in quality parts. That's why our kit consists of Intercoolers by Wagner Tuning and Hi--Flo pipes by NM Engineering. Get the most out of your MINI with a performance upgrade kit that will have impact. Intercooler and Hi-Flo Pipes.
Mini Cooper Intake Upgrade Application Guide
Created: April 08, 2016
Mini Cooper Intake Upgrades are designed to improve the flow of air into the engine by replacing the restrictive stock airbox and filter. Gains are typically felt in the mid-to-upper RPM with typical horsepower gains of 4 to 6 HP.
Mini Cooper Air Filter
Created: December 12, 2013
Mini Cooper Air Filter One of the easiest ways to add horsepower to your MINI Cooper is by helping the engine breathe better. Washable, re-usable filters are a great investment in the long run, and make it easy for your MINI Cooper's engine to have clean air without added expense! Choose from our ..
Customer Reviews
Recently Viewed Items