× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Hi-Flow intake system for the turbocharged R56, R55, and R57 MINI Cooper S USA models only. Unlike some competitors, this Premium intake features an integrated larger turbo inlet tube. CNC mandrel bent aluminum pipe, stainless brackets and silicone couplings that are all designed, engineered and manufactured to fit and perform.

Choose between kits with the blue re-usable filter or the white paper filter.  The re-usable filter lasts for many years if properly cleaned and maintained.  The paper filter is a more convenient disposable filter, just toss the old and install a new filter.

This Induction Kit is CARB APPROVED! Product includes CARB exemption decal necessary to pass the visual inspection portion of the California Emissions test.

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The 'Open-Air-Box' system gives you the abundance and unrestricted 360° of air source compared to OEM's sealed air box with flat filter and tube fed air source. During R&D, we installed temperature probes around the engine compartment and the gauge showed the inside temperature matched the ambient after vehicle sped past 20 mph. And by logging the Mass Air Flow (MAF) sensor also showed that open-air-box intake generated higher volume (gr/sec) of air going through the sensor. So when we had to choose between (a) cooler air at all speed with limited air source, vs. (b) cooler air at 20~ mph. with unlimited air source, the choice was pretty obvious.

For 2011 and newer models, see G2NME2112.

Available with Blue, Black, or Carbon Fiber intake Snorkel, for US Models with Mass Air Flow sensor (MAF). Select appropriate version.

Note: The height of this induction kit is the same height as the stock Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

See G2NME2125 for the Filter Maintenance kit.

See G2NME2121 for the Replacement Filter Element.

For 2007-2010 Cooper S NON-US models, see G2NME2105-P.

For 2011-03/2012 Cooper S US models, see G2NME2116-P.

For 2011- Cooper S NON-US models, see G2NME2117-P.

For 04/2012+ Cooper S US models, see G2NME2122-P.

 

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Mini Cooper S Intake Hi-Flow Induction R55 R56 R57 2007-2010

Hi-Flow Induction System from NM Engineering with the BLUE Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

Hi-Flow Induction System from NM Engineering with the BLACK Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

Hi-Flow Induction System from NM Engineering with the CARBON FIBER Intake Snorkel (Inlet Tube) and a Paper Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.  This kit uses the Paper filter for those that prefer the disposable paper filter over the re-usable oiled filter that requires periodic cleaning.  Same performance and price as the oiled filber.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

Hi-Flow Induction System from NM Engineering with the BLUE Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

Hi-Flow Induction System from NM Engineering with the CARBON FIBER Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:>

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and> Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

 

Hi-Flow Induction System from NM Engineering with the BLACK Intake Snorkel (Inlet Tube) and a re-usable Filter.  This intake upgrade provides higher air flow into the engine which is the first step towards increased power and greater engine efficiency.

NM Engineering introduces the complete air intake system for the turbocharged MINI Cooper S models. Unlike some competitors, NM’s intake features an integrated larger turbo inlet tube. The stainless brackets, hardwares and silicone couplings were all designed, engineered and manufactured to fit and perform.

This Induction Kit is CARB APPROVED!

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop.
2008-2010 R55 MINI Cooper S Clubman.
2009-2010 R57 MINI Cooper S Convertible.

Also fits JCW models with the N14 engine (thru 2012).

The Open Air Box System gives you an unrestricted 360° of air intake, compared to the OEM sealed air box which has a flat filter and a tube fed air source.

During Research and Development, we installed multiple temperature probes around the engine compartment and what we found was the inside temperature matched the ambient temperature after the vehicle surpassed 20 mph.

The Mass Air Flow (MAF) sensor also showed that the Open Air Box Intake generated a higher volume of incoming air.

The end result being Increased Horsepower and Increased Fuel Efficiency.

Note: The height of this induction kit is the same height as the OEM Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

Other Products You May Want to Purchase.

Hi-Flow intake system for the turbocharged R56, R55, and R57 MINI Cooper S USA models only. Unlike some competitors, this Premium intake features an integrated larger turbo inlet tube. CNC mandrel bent aluminum pipe, stainless brackets and silicone couplings that are all designed, engineered and manufactured to fit and perform.

Choose between kits with the blue re-usable filter or the white paper filter.  The re-usable filter lasts for many years if properly cleaned and maintained.  The paper filter is a more convenient disposable filter, just toss the old and install a new filter.

This Induction Kit is CARB APPROVED! Product includes CARB exemption decal necessary to pass the visual inspection portion of the California Emissions test.

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Also fits JCW models with the N14 engine (thru 2012).
Compatible with USA and Canadian models. (NOT for Euro models).

The 'Open-Air-Box' system gives you the abundance and unrestricted 360° of air source compared to OEM's sealed air box with flat filter and tube fed air source. During R&D, we installed temperature probes around the engine compartment and the gauge showed the inside temperature matched the ambient after vehicle sped past 20 mph. And by logging the Mass Air Flow (MAF) sensor also showed that open-air-box intake generated higher volume (gr/sec) of air going through the sensor. So when we had to choose between (a) cooler air at all speed with limited air source, vs. (b) cooler air at 20~ mph. with unlimited air source, the choice was pretty obvious.

For 2011 and newer models, see G2NME2112.

Available with Blue, Black, or Carbon Fiber intake Snorkel, for US Models with Mass Air Flow sensor (MAF). Select appropriate version.

Note: The height of this induction kit is the same height as the stock Cooper S Airbox. If your strut bar clears the stock airbox, it will clear this Induction system!

See G2NME2125 for the Filter Maintenance kit.

See G2NME2121 for the Replacement Filter Element.

For 2007-2010 Cooper S NON-US models, see G2NME2105-P.

For 2011-03/2012 Cooper S US models, see G2NME2116-P.

For 2011- Cooper S NON-US models, see G2NME2117-P.

For 04/2012+ Cooper S US models, see G2NME2122-P.

 

Recommended items for: G2NME2103-P
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Performance Air Intakes and Air Filters | Gen2 R55-R61
Created: January 09, 2020
Find the performance air intakes, air filters, and kits you need for your 2007-2016 MINI Cooper and Cooper S R55 R56 R57 R58 R59 R60 R61
How-To Install a Turbocharger-2012 JCW MINI Cooper N14 Engine
Created: July 29, 2019
In this video we replace the factory turbocharger with a higher spec JM Turbocharger, replace the charge pipe and factory down pipe, and modify the front of the exhaust system on our R58 JCW MINI Cooper Coupe.
 Intake Kits & Parts for R55-R61 MINI Cooper and Cooper S
Created: September 05, 2017
The Cold Air Intake upgrade is one of the most common and simplest performance upgrades you can do to your Mini Cooper and Cooper S. Whether it is a simple filter replacement or a complete Intake Kit, these products are 'bolt-on' solutions with no permanent modifications to the...
Find the best Intake Upgrade for your MINI Cooper
Created: April 08, 2016
Mini Cooper Intake Upgrades are designed to improve the flow of air into the engine by replacing the restrictive stock airbox and filter. Gains are typically felt in the mid-to-upper RPM with typical horsepower gains of 4 to 6 HP.
NM MINI Tuning Products
Created: December 12, 2013
NM Engineering NM MINI Tuning products help improve your motoring experience while keeping the essence of what makes a MINI a MINI.
NM Hi-Flow Induction Kit Installation Instructions - US Models
Created: February 22, 2013
MINI Cooper Hi-Flow Induction Kit Installation Instruction for US model MINIs