Mini Mania
Est. 1974
Shop by Car
 Live Help
800-946-2642
Search
All
Your Price $3.95
Qty:
Crush Washer For Oil Drain Plug Oem - R55/56/57 Cooper And S

Crush Washer For Oil Drain Plug Oem - R55/56/57 Cooper And S

Crush Washer For Oil Drain Plug Oem - R55/56/57 Cooper And S

Crush Washer For Oil Drain Plug Oem - R55/56/57 Cooper And S

Crush Washer For Oil Drain Plug Oem - R55/56/57 Cooper And S
The 2007+ MINI Cooper and Cooper S oil drain plug uses a special one-time-use copper 'crush' washer.

Remember to use Full Synthetic motor oil!

See G2NME1052 for the 27mm socket required to loosen the oil filter cap.

Torque oil filter cannister to 25Nm or 18 lb-ft, and drain plug to 30Nm or 22 lb-ft.

For use on:

2007+ R56 MINI Cooper and Cooper S Hatchback
2008+ R55 MINI Cooper and Cooper S CLUBMAN
2009+ R57 MINI Cooper and Cooper S Convertibles

NOT for 2002-2006 Models.

To reset the oil change interval in your MINI, see oil service reset.

Technical Information:
Oil Service Interval Reset - 2007 and Newer MINIs
Additional Related Articles:

Share on Facebook

For the following models:

2007+ R56 MINI Cooper and Cooper S Hatchback
2008+ R55 MINI Cooper and Cooper S CLUBMAN
2009+ R57 MINI Cooper and Cooper S Convertibles

 

To Reset Service Indicators such as the Oil Service Interval, or the Brake Wear Light, perform the following steps:

To enter the service Menu:

  • Insert Key
  • Do not press clutch / brake
  • Press Start button
  • Wait until the Car / revelant Service symbol disappears on the Rev counter display
  • Immediately after the symbol goes out - Press and hold Both buttons on the Rev Counter
  • Continue to hold - the system will run a dash light check
  • Continue to hold
  • Display will then show VIN / Menu, - continue to hold through this until the time Reappears on the display.
  • Now release Only the Right hand Button (trip reset) for about a second, and then press and hold again (whilst still holding the LH button)
  • After another second or 2 the display will show the Front Brake Symbol
  • You Are now in the Service Menu
  • Release both buttons on the Rev Counter - and complete the rest of the procedure with the BC button alone
  • Use the BC Button (on indicator stalk) to scroll through to the relevant symbol - eg Oil Reset or Rear Brakes
  • To Reset the warning indicator light - Press & Hold the BC Button at the revelant symbol until RESET appears - then press and hold again until the process is complete.
  • Turn Off and On the Ignition again - Warning should now have gone!

 

Here is another procedure posted by 'A' below (Thank you A):

  • Start the ignition and wait for the service info to go out.
  • Then press and hold the right button.
  • The first service item should appear after 10s on the display.
  • Release the odo-reset button and keep the button on the light stack pressed.
  • Now "reset?" should appear below the service item.
  • To reset, press AND keep the indicator tack button once more.
  • During this time a clock will appear. Some seconds later the procedure is complete.
  • Repeat for all service items you want to reset.

 

Good Luck !

For Gen 1 MINIs (2002-2006 R50 & R53 Hatchbacks and 2005-2008 R52 Convertibles), see this article.

 

Read Full Article
Customer Reviews
Write a customer review
Review this item and receive a $5 coupon off you're next purchase!* Click Here For Details
Click Here For Details