Free Shipping

800-946-2642
Shop by Car
Engine
Mini Cooper Intercooler N18 Installation Instructions
Created: April 05, 2016
Mini Cooper Intercooler Installation Instructions for the Gen2 Mini Cooper S 2011+ Facelift models with the N18 Turbocharged engine.
Mini Cooper Intercooler N14 Installation Instructions
Created: April 05, 2016
Mini Cooper Intercooler Installation Instructions for the Gen2 Mini Cooper S 2007-2010 models with the N14 Turbocharged engine.
Mini Cooper Cold Air Intake K&N Typhoon Installation Instructions
Created: December 30, 2015
The K&N Typhoon air intake is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range.
MINI Cooper Crankshaft Pulley Harmonic Fluid Damper
Created: October 12, 2015
Introducing the Pro Series Fluid Filled Harmonic Balancer for the MINI! We know the stock Cooper S Harmonic Balancer fails ofer time due to the deterioration of the rubber supports. This unit is a far better design, more durable, and Costs LESS than the factory replacement!
MINI Cooper Turbo Heatshield Installation
Created: February 27, 2015
The M7 Aerogel Turbo Heatshield is designed to fit over the stock turbo using pre-existing mounting points.
NM Engine Torque Arm Bushing Insert Installation Instructions
Created: February 22, 2013
ROUND TYPE Premium Engine Torque Arm Mount Insert is made of polyurethane and reduces engine movement allowing for quicker and more direct transfer of power from the engine to the wheels.
MINI Cooper Hi-Flow Turbo Outlet Pipe Installation Instructions
Created: February 22, 2013
Installation instructions for the Hi_flow Turbo Outlet Pipe
Created: February 22, 2013
NM Turbo Heat Shield Titanium Installation Instructions for R55 R56 R57 R60
MINI Cooper Oil Breather Catch Can Installation
Created: February 09, 2007
Mini Cooper Oil Breather Catch Can installation instructions Tools needed: Screwdriver, utility knife, adjustable wrench, power drillRemove intercooler to access hoses.1. Hold oil can as shown and mark firewall hole for drilling. 2. Drill hole in the plastic firewall using a drill bit roughly the size of the...
MINI Cooper Supercharger Pulley Installation -NME5011
Created: April 29, 2005
MINI COOPER S PULLEY UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER NME5041 & NME5011 Download These Instructions in PDF Format for Printing (1.2 Mb, 24 pages) Below are instructions for the ULTRIK Pulley Upgrade Kit, Part Number NME...